{"product_id":"strobon-neo","title":"STROBON NEO  - RC Controlled RGB LED Stripes","description":"\u003cp\u003eSTROBON lights have long led the market in navigation lighting for RC models. We're excited to introduce the next evolution—\u003cstrong\u003eStrobon NEO\u003c\/strong\u003e: an RGB LED strip controller specifically designed for RC airplanes and multicopters.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eStrobon NEO\u003c\/strong\u003e is the first RGB LED strip controller tailored for the RC hobby. It supports up to four 10-piece WS2812B LED strips simultaneously, enabling vibrant light configurations on multicopter arms or airplane wings, tail, and nose.\u003c\/p\u003e\n\u003cp\u003e🧠 \u003cstrong\u003eSmart Control:\u003c\/strong\u003e\u003cbr\u003eNEO features 40 unique patterns suitable for various aircraft configurations. It works in two modes—\u003cstrong\u003eRC Controlled Mode\u003c\/strong\u003e and \u003cstrong\u003eStandalone Mode\u003c\/strong\u003e—and allows brightness control from 0% to 100% via your transmitter’s servo channel.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandalone Mode:\u003c\/strong\u003e Connect to a 5V BEC for full brightness, continuous operation without RC input.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRC Controlled Mode:\u003c\/strong\u003e Connect to any spare servo channel to toggle on\/off and adjust brightness or patterns.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cimg alt=\"Strobon NEO Controller\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0333\/9219\/7763\/files\/1134-thickbox_default_480x480.jpg?v=1628274067\"\u003e\u003c\/p\u003e\n\u003ch3\u003e📡 Standard RC Receiver Connection\u003c\/h3\u003e\n\u003cp\u003e\u003cimg alt=\"RC Receiver Wiring\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0333\/9219\/7763\/files\/1151_480x480.jpg?v=1628274140\"\u003e\u003c\/p\u003e\n\u003ch3\u003e🔋 Standalone Battery Connection\u003c\/h3\u003e\n\u003cp\u003e\u003cimg alt=\"Standalone Power Wiring\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0333\/9219\/7763\/files\/1152_480x480.jpg?v=1628274197\"\u003e\u003c\/p\u003e\n\u003ch3\u003e⚙️ Modes\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003e*Note:\u003c\/strong\u003e Mode switching is available on firmware versions released after 1 April 2015.\u003c\/p\u003e\n\u003cp\u003eNEO displays its active mode at startup using \u003cstrong\u003eRED\u003c\/strong\u003e (Mode 1) or \u003cstrong\u003eGREEN\u003c\/strong\u003e (Mode 2). After this 1-second indicator, it resumes the last used pattern and power level.\u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"Startup Mode Display\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0333\/9219\/7763\/files\/Strobon_NEO_Setup_1_480x480.png?v=1628274287\"\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMode 1 (Brightness Control Only):\u003c\/strong\u003e\u003cbr\u003eUse a switch or knob to control LED brightness and toggle power.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMode 2 (Brightness + Pattern Control):\u003c\/strong\u003e\u003cbr\u003eBrightness is controlled up to 70% servo input. 100% input changes to the next pattern. Ideal with a 3-position switch.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e🧭 Changing Modes\u003c\/h3\u003e\n\u003cp\u003eTo switch modes, press and hold the button before powering on. Once powered, release the button when the LEDs turn \u003cstrong\u003eBLUE\u003c\/strong\u003e. The selected mode is confirmed by a \u003cstrong\u003eRED\u003c\/strong\u003e (Mode 1) or \u003cstrong\u003eGREEN\u003c\/strong\u003e (Mode 2) indicator.\u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"Mode Switching Illustration\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0333\/9219\/7763\/files\/Strobon_NEO_Setup_2_480x480.png?v=1628274348\"\u003e\u003c\/p\u003e\n\u003ch3\u003e⚠️ Warning \u0026amp; Troubleshooting\u003c\/h3\u003e\n\u003cp\u003eAll NEO controllers and LED strips are fully tested before dispatch. Common issues reported are:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eLow\/unstable voltage:\u003c\/strong\u003e Can disrupt LED data signals. Test with a single strip and ensure stable 5V 1A supply.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOver-voltage (above 6V):\u003c\/strong\u003e Can permanently damage LED ICs. This often causes partial strip failure.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMechanical vibration:\u003c\/strong\u003e Can break internal LED connections, especially after crashes or on vibrating frames.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eTip:\u003c\/strong\u003e Press gently on the faulty LED. If colour returns, internal damage is likely and should be replaced.\u003c\/p\u003e\n\u003cp\u003eYou can find \u003ca href=\"http:\/\/www.flytron.com\/12-rc-light-systems\" target=\"_blank\"\u003ecompatible LED strips here\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch3\u003e▶️ Demo Video\u003c\/h3\u003e\n\u003cp\u003e\u003ciframe height=\"315\" width=\"560\" src=\"https:\/\/www.youtube.com\/embed\/5mJffreoQls?rel=0\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003ch3\u003e📐 Specifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eSupply Voltage\u003c\/td\u003e\n\u003ctd\u003e5V (via servo channel or BEC)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temperature\u003c\/td\u003e\n\u003ctd\u003e-40°C to +105°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCurrent Consumption\u003c\/td\u003e\n\u003ctd\u003e50mA to 1A (depending on pattern and brightness)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions (L × W × H)\u003c\/td\u003e\n\u003ctd\u003e24.3mm × 9.2mm × 4mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e5g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003e❓ FAQ\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eHow many LEDs can it drive?\u003c\/strong\u003e\u003cbr\u003eEach output channel supports up to 10 LEDs. With 4 outputs total, that’s 40 LEDs per controller.\u003c\/p\u003e","brand":"Flytron","offers":[{"title":"Controller + 4 Stripes","offer_id":32226714288259,"sku":"STRO-NEO-RC-CONT-RGB-LED-1","price":29.9,"currency_code":"GBP","in_stock":true},{"title":"Controller Only","offer_id":32226714321027,"sku":"STRO-NEO-RC-CONT-RGB-LED-2","price":9.9,"currency_code":"GBP","in_stock":true},{"title":"Single 10 LEDs Stripe","offer_id":32226714353795,"sku":"STRO-NEO-RC-CONT-RGB-LED-3","price":5.9,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0333\/9219\/7763\/products\/1076.jpg?v=1581376908","url":"https:\/\/flytron.com\/products\/strobon-neo","provider":"Flytron","version":"1.0","type":"link"}