STROBON Standalone

EU Customers! You can find this product on Copter.eu

This product is compatible with the latest FAA and CAA anti-collision lights rules for drones. It can be seen from at least 3 miles at night.

We are manufacturing the Cree® version of this product right now.
Please visit the product page for the brightest Strobon ever:
http://www.flytron.com/led-systems/322-strobon-cree-standalone.html

📝 Product Description

Strobon Standalone is a practical navigation strobe solution for enclosed drones such as:

• DJI (Phantom, Inspire, Mavic, Spark, Mavic Air, Mavic Mini and others)
• Parrot
• senseFly
• Xiaomi
• 3DR Solo
• Walkera and others

This product weighs less than 4 grams, and DJI Mini (1/2) drones can carry two units without affecting balance or exceeding the 250g limit.

🔌 No Cable, No Fuss

Just attach it to your drone or model aircraft using the included 15mm 3M Dual Lock fasteners or your preferred glue/Velcro. Press the button to turn it on—no setup required.

These fasteners provide a secure, vibration- and dust-resistant attachment.

Under the rear motor mount installation to increase day and night visibility from the ground.

Drone top installation for warning nearby aircraft.

⚙️ Features

• 5 hours of continuous operation with onboard battery
• Powerful 3W LED
• No cabling required
• Easy-to-use single button interface
• Onboard battery status and charge indicator system
• Compatible with all 5V MicroUSB cables and chargers (cable not included)
• Contact pads (L+ and L-) for external LED support
• Battery includes internal overcharge and discharge protection

🎨 Colour Selection

Due to human eye limitations and LED technology, each colour has different visibility and energy efficiency. Based on our long-term testing:

WHITE: Best visibility and efficiency.
YELLOW: Similar to white but with better mist penetration.
RED: Second-best visibility. Equal efficiency to white and excellent for warnings.
GREEN: Third-best for visibility and efficiency. Standard for left/right navigation.
BLUE: Least visibility. Not recommended for warning or navigation—best for special use.
IR 850nm: Visible to night vision goggles and night-mode cameras.
IR 940nm: Visible to night vision goggles only. Invisible to the human eye; limited camera detection.

Bottom line: White and Red are best for long-range visibility. Green helps identify orientation. Blue is for specialised applications only.

🔋 Usage

• Battery Status: Press and release the button while OFF to check status
  (1 blink = Charge needed, 2 blinks = OK, 3 blinks = Fully charged)
• ON/OFF: Press and hold for 3 seconds to turn on or off
• Charging: Connect to any micro USB charger or computer port
  - Short bursts = Charging
  - 1 sec ON / 2 sec OFF = Fully charged
  Charging time is approx. 2 hours

⚠️ Notice

The battery is equipped with a PCM module for overcharge and discharge protection. If the unit shows no signs of life, it may have activated low-voltage protection. Simply recharge to restore operation.

📐 Specifications

• Dimensions: 22mm × 18mm × 10mm
• Weight: 4g
• Current Consumption: <15mA per hour
• Charge Port: MicroUSB
• Charge Current: Max 40mA
• Charge Time: Approx. 2 hours
• Battery Type: 80mAh LiPo with integrated PCM safety circuit