STROBON C-2 Dual Cree® Standalone Drone Strobe with USB Type-C Charging

This product is compatible with the latest FAA and CAA anti-collision light regulations for drones. It is visible from at least 3 miles at night.

The Strobon™ C-2 is our first dual-Cree® navigation strobe with USB-C charging, specially designed for enclosed drones such as:

• DJI (Mini 2, Mini, Spark, Mavic Air, Mavic Mini, Phantom, Inspire)
• Parrot
• senseFly
• Xiaomi
• Walkera and others

This model was developed specifically for DJI Mini and Mini 2 drones, which support USB-C charging and have mounting space under the rear motor mounts. It includes 15mm 3M Dual Lock fasteners for secure, vibration-resistant installation.

Weighing less than 4 grams, the C-2 can be used in pairs on DJI Mini series drones without affecting balance or exceeding the 250g legal limit.

Fits between DJI Mini 2 body and rear motor mount when folded.

🔌 No Cable, No Fuss

Attach the light using the included 3M Dual Lock fasteners or your preferred adhesive. Press the button to activate—no setup required.

These fasteners offer vibration- and dust-resistant mounting.

Improves visibility from ground in day or night conditions.

Top-mounted version for aerial visibility to nearby aircraft.

⚙️ Features

• Dual high-intensity Cree® LEDs
• 1.5+ hours continuous operation
• Compatible with DJI Mini (1/2) under 250g with two units
• No external wiring required
• Simple one-button interface
• Battery status and charging indicator
• USB Type-C charging (cable not included)
• Built-in overcharge and discharge protection

🎨 Colour Selection

Each colour offers different visibility and energy efficiency due to the human eye's sensitivity and LED design:

WHITE: Best visibility and efficiency
RED: Second-best for visibility, ideal for warning
GREEN: Good visibility and commonly used for left/right navigation
BLUE: Least visibility; suitable only for special applications

Bottom line: White and Red are ideal for maximum visibility. Green helps with directional awareness. Use Blue only in specialised scenarios.

🧭 Usage

• Battery Status: Press and release button while OFF
  - 1 blink: Needs charging
  - 2 blinks: OK
  - 3 blinks: Fully charged
• ON/OFF: Press and hold for 3 seconds
• Charging: Connect using a USB-C cable
  - Blinks rapidly while charging
  - Blinks 1s ON / 2s OFF when fully charged
  - Charging time ~2 hours

⚠️ Notice

The battery includes a built-in PCM module for protection. If the unit is unresponsive, it may be in low-voltage lockout mode. Recharging will restore function.

📐 Specifications

• Dimensions: 20mm × 16mm × 8mm
• Weight: ~4g
• Power Consumption: <30mA per hour
• Charging Port: USB Type-C
• Charging Current: Max 40mA
• Charging Time: Approx. 2 hours
• Battery: 100mAh LiPo with PCM protection