Cree® XPE LEDs with Breakout Board
This smaller package extends Cree’s award-winning LED performance into new lighting applications.
The breakout board features clear polarity markings and standard soldering pads for simple and reliable connection.
The bottom of the PCB is directly linked to the Cree® LED’s cooling pad, eliminating the need for additional heat sinks in strobe applications.
Compact Cree LED board designed for direct integration and efficient cooling.
These breakout boards are fully compatible with our STROBON™ Cree® Standalone lights and their external LED pads. Only a pair of wires is needed to extend the strobe light to the opposite side of your flying platform.
IMPORTANT: Each LED colour has a unique forward voltage. Only connect LEDs of the same colour in parallel—otherwise, only the LED with the lower voltage will operate.
📏 Board Dimensions
Size: 15mm × 7mm × 3mm
Weight: < 2g
⚠️ Warning: All LED light sources require a driver. Direct connection to a power supply will result in immediate damage due to high current.
To operate these LEDs continuously from a battery, use a properly calculated series resistor.
Use this calculator to determine the correct resistor value.
📊 XPE LED Specifications
Size | 3.45 × 3.45 mm |
---|---|
Product Options | White High-Efficiency Photo Red Green Blue |
Maximum Continuous Drive Current | 1 A (White) |
Max Power | 3.5 W |
Max Light Output | 307 lm |
Maximum Efficacy at Binning | 122 lm/W |
Typical Forward Voltage | 3.1 V @ 350 mA |
Maximum Reverse Voltage | 5 V |
Viewing Angle | 115° |
Maximum Junction Temperature | 150 °C |
DATASHEET |