{"title":"Home page","description":"","products":[{"product_id":"strobon-xl-navigation-strobe","title":"STROBON XL Navigation Strobes","description":"\u003cp\u003e\u003cspan style=\"color: #ff2a00;\"\u003e\u003cstrong\u003eThis product is compatible with the latest FAA and CAA anti-collision lights rules for drones. It can be seen from at least 3 miles at night.\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e New generation STROBON with remote-controllable solid RED light and powerful strobe\u003c\/p\u003e\n\u003cp\u003eStrobon XL can work on stand-alone mode with a battery supply or controllable over a servo channel.\u003cbr\u003e \u003cbr\u003eIf you use more than one Strobon XL on same servo channel, they will synchronize the strobes with servo signal count. Mean, all strobes will flash at the same time as a real strobe system.\u003c\/p\u003e\n\u003cp\u003ePower Consumption is only 80mA per hours. Looks great and saves your plane's life when you lose the orientation or the plane’s current position at night. \u003c\/p\u003e\n\u003cp\u003eCustomer Video, Thank you, Fernando :)\u003cbr\u003e(you can find the instructions and wiring details under the video description)\u003cbr\u003e\u003cbr\u003e\u003ciframe height=\"281\" width=\"500\" src=\"https:\/\/www.youtube.com\/embed\/6XMfcZfgWTI?rel=0\" frameborder=\"0\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003e  \u003c\/p\u003e\n\u003cp style=\"font-style: normal; font-size: 11px; font-family: Verdana, Arial, Helvetica, sans-serif; margin: 0em 0px 0em 0px;\"\u003e  \u003c\/p\u003e\n\u003cp\u003eDesktop Test Videos from 2012\u003c\/p\u003e\n\u003cp style=\"font-style: normal; font-size: 11px; font-family: Verdana, Arial, Helvetica, sans-serif; margin: 0em 0px 0em 0px;\"\u003e\u003ciframe height=\"315\" width=\"560\" src=\"\/\/www.youtube.com\/embed\/yJ9RRCWd2lc?rel=0\" frameborder=\"0\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp style=\"font-style: normal; font-size: 11px; font-family: Verdana, Arial, Helvetica, sans-serif; margin: 0em 0px 0em 0px;\"\u003e \u003c\/p\u003e\n\u003cstrong\u003eCabling\u003c\/strong\u003e\u003cbr\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\u003cimg style=\"float: none;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0333\/9219\/7763\/files\/strobon-xl-navigation-strobe-red_480x480.jpg?v=1581602784\"\u003e\u003c\/div\u003e\n\u003cp style=\"font-style: normal; font-size: 11px; font-family: Verdana, Arial, Helvetica, sans-serif; margin: 0em 0px 0em 0px;\"\u003e \u003c\/p\u003e\n\u003cp\u003e   \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e    RC CHANNEL SETTINGS\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0333\/9219\/7763\/files\/shutter_positions_3_240x240.png?v=1581600598\"\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0333\/9219\/7763\/files\/shutter_positions_3_240x240.png?v=1581600598\"\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e  \u003c\/p\u003e\n\u003ch3\u003e  \u003cstrong\u003eFeatures:\u003c\/strong\u003e\n\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eWeight: 3.3g without cable\u003c\/li\u003e\n\u003cli\u003eDimensions: 51x18x7mm\u003c\/li\u003e\n\u003cli\u003eScrew Hole Dimensions: 3mm holes with 43mm space  \u003c\/li\u003e\n\u003cli\u003eWorking Voltage: 5-6v  (we are suggesting 3A UBEC and 2S lipo for supply)\u003c\/li\u003e\n\u003cli\u003eCurrent Consumption: 5mA(idle)\/80mA(average when working)\u003c\/li\u003e\n\u003cli\u003eWire Length(optional): 30cm standard servo cable with servo plug\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Flytron","offers":[{"title":"Red(solid)-White(strobe) \/ without cable","offer_id":32120990040195,"sku":"STRO-XL-NAVI-STRO-RED-SOLI-WHIT","price":7.49,"currency_code":"GBP","in_stock":true},{"title":"Red(solid)-White(strobe) \/ with cable","offer_id":32120990072963,"sku":"STRO-XL-NAVI-STRO-RED-SOLI-WHIT-2","price":8.99,"currency_code":"GBP","in_stock":true},{"title":"Green(solid)-White(strobe) \/ without cable","offer_id":32120990105731,"sku":"STRO-XL-NAVI-STRO-GREE-SOLI-WHIT","price":7.49,"currency_code":"GBP","in_stock":true},{"title":"Green(solid)-White(strobe) \/ with cable","offer_id":32120990138499,"sku":"STRO-XL-NAVI-STRO-GREE-SOLI-WHIT-2","price":8.99,"currency_code":"GBP","in_stock":true},{"title":"Police: Red(strobe)-Blue(strobe) \/ without cable","offer_id":32120990171267,"sku":"STRO-XL-NAVI-STRO-POLI-RED-STRO","price":7.49,"currency_code":"GBP","in_stock":true},{"title":"Police: Red(strobe)-Blue(strobe) \/ with cable","offer_id":32120990204035,"sku":"STRO-XL-NAVI-STRO-POLI-RED-STRO-2","price":8.99,"currency_code":"GBP","in_stock":true},{"title":"UK Police: Blue(strobe)-Blue(strobe) \/ without cable","offer_id":32120990236803,"sku":"STRO-XL-NAVI-STRO-UK-POLI-BLUE","price":7.49,"currency_code":"GBP","in_stock":true},{"title":"UK Police: Blue(strobe)-Blue(strobe) \/ with cable","offer_id":32120990269571,"sku":"STRO-XL-NAVI-STRO-UK-POLI-BLUE-2","price":8.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0333\/9219\/7763\/products\/819.jpg?v=1581362217"},{"product_id":"strobon-se-v2-navigation-strobe-controller","title":"Strobon SE v2 - Navigation Strobe Controller","description":"\u003cp\u003eSTROBON Lights are the most powerful navigation lights on the model market for years.\u003c\/p\u003e\n\u003cp\u003eStrobon SE v2 is completely the same circuit design as our revolutionary STROBON v2 Navigation Strobes excluding the LED and size. It is a more flexible design than other LED embedded Strobon models. \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNow, it's configurable for 5 different patterns!\u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eStrobe\u003c\/strong\u003e  (Legendary Strobon v1 strobe effect. 3 fast flashes like xenon wing tip flashlights)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlink\u003c\/strong\u003e (Simulates belly or tail lights. Continuous ON\/OFF)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeartbeat\u003c\/strong\u003e (standard beacon light pattern, ramp up\/ramp down\/off)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRotating Beacon\u003c\/strong\u003e (perfect simulation of rolling beacons. ramp up\/flash\/ramp down\/off)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStatic\u003c\/strong\u003e (you can use it as landing headlights or static wing-tip lights)\u003cbr\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cstrong\u003eIt allows 2 different working modes;\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eRC Controlled Mode:\u003c\/strong\u003e Plug it on your RC receiver’s any channel for RC mode, then you can enable\/disable it over the selected servo channel. \u003cbr\u003eEach Strobon counts the servo signals. So, you can plug more than one Strobon into the same RC channel to synchronize them.  (check the schematic below)\u003cbr\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandalone Mode:\u003c\/strong\u003e Power it directly from the battery (3.5-6v) it works on Standalone mode and works continuously.\u003cbr\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eIt works with any Power LED(3W)  and it also drives more than one Power LED (the colours must be the same for the same forward voltage).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eYou can order Sotrobon SE compatible high-quality 3W \u003c\/strong\u003e\u003cstrong\u003ePower LEDs from our store\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/store.flytron.com\/collections\/led-light-systems\/leds\"\u003ehttps:\/\/store.flytron.com\/collections\/led-light-systems\/leds\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0333\/9219\/7763\/files\/Strobon_Standard_bb_1_480x480.png?v=1582199029\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003eSCHEMATIC for SYNCHRONIZED \u0026amp; RC CONTROLLED MODE\u003c\/h3\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e    RC CHANNEL SETTINGS\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0333\/9219\/7763\/files\/shutter_positions_3_480x480.png?v=1581600598\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003e    \u003c\/p\u003e\n\u003ch3\u003eSCHEMATIC for STANDALONE MODE\u003cbr\u003e\u003cbr\u003e\n\u003c\/h3\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0333\/9219\/7763\/files\/Strobon_SE_V2_cabling2_480x480.png?v=1582199065\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003ePATTERN SELECTION\u003c\/h3\u003e\n\u003cp\u003eAll you need a piece of wire or a tweezer to change the pattern. \u003cbr\u003eConnect two small pads of the Strobon SE v2 board while it's working (it records the pattern, so you don't need to repeat after the power off)\u003cbr\u003eIt will stop working when you connect these pins and jump to the next pattern when you release the connection. \u003cbr\u003eThat's all.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0333\/9219\/7763\/files\/Strobon_SE_V2_cabling_480x480.png?v=1582199082\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0333\/9219\/7763\/files\/airplane_navigation_light_locations_480x480.png?v=1581600498\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/85ATkWa9MOs\" width=\"501\" height=\"282\" frameborder=\"0\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eCustomer Video, Thank you, Fernando :)\u003cbr\u003e(you can find the instructions and wiring details under the video description)\u003cbr\u003e\u003cbr\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/6XMfcZfgWTI?rel=0\" width=\"500\" height=\"281\" frameborder=\"0\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003e    Customer Video (thank you, Otto)\u003c\/p\u003e\n\u003cp\u003e\u003ciframe src=\"\/\/www.youtube.com\/embed\/UkcgMtlDLQY\" width=\"560\" height=\"315\" frameborder=\"0\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003e In this video, we soldered two Power LED back to back for 360 degrees visible strobe. \u003c\/p\u003e\n\u003cp\u003e\u003ciframe src=\"\/\/www.youtube.com\/embed\/O75IgWfdGFU?rel=0\" width=\"560\" height=\"315\" frameborder=\"0\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e \u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSupply Voltage: 3.5 - 6 volt\u003c\/li\u003e\n\u003cli\u003eCurrent Consumption per hour  @5V\u003cbr\u003eStrobe: average 60mA (1A in event of the flash)\u003cbr\u003eBlink: 70mA (150ma ON)\u003cbr\u003eHeartbeat: 120mA\u003cbr\u003eRolling Beacon: average  170mA (1A in event of the flash)\u003cbr\u003eStatic: 140mA\u003c\/li\u003e\n\u003cli\u003eDimensions: 24.3mm X 9.2mm X 2mm\u003c\/li\u003e\n\u003cli\u003eWeight: 0.3 gram without wires\u003c\/li\u003e\n\u003cli\u003eOperating Temperature: -40 to +105 °C\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFrequently Question:\u003c\/strong\u003e How many LEDs can it drives?\u003cbr\u003e\u003cstrong\u003eAnswer:\u003c\/strong\u003e There is no limit. The light intensity drops depend led count. Our suggestion is a maximum of 3-5 units of 3W Power LEDs to give acceptable light intensity.  \u003c\/p\u003e","brand":"Flytron","offers":[{"title":"Default Title","offer_id":32071510098051,"sku":"STRO-SE-V2-NAVI-STRO-CONT","price":6.15,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0333\/9219\/7763\/products\/811.jpg?v=1581362217"},{"product_id":"strobon-neo","title":"STROBON NEO  - RC Controlled RGB LED Stripes","description":"\u003cp\u003eSTROBON lights have long led the market in navigation lighting for RC models. We're excited to introduce the next evolution—\u003cstrong\u003eStrobon NEO\u003c\/strong\u003e: an RGB LED strip controller specifically designed for RC airplanes and multicopters.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eStrobon NEO\u003c\/strong\u003e is the first RGB LED strip controller tailored for the RC hobby. It supports up to four 10-piece WS2812B LED strips simultaneously, enabling vibrant light configurations on multicopter arms or airplane wings, tail, and nose.\u003c\/p\u003e\n\u003cp\u003e🧠 \u003cstrong\u003eSmart Control:\u003c\/strong\u003e\u003cbr\u003eNEO features 40 unique patterns suitable for various aircraft configurations. It works in two modes—\u003cstrong\u003eRC Controlled Mode\u003c\/strong\u003e and \u003cstrong\u003eStandalone Mode\u003c\/strong\u003e—and allows brightness control from 0% to 100% via your transmitter’s servo channel.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandalone Mode:\u003c\/strong\u003e Connect to a 5V BEC for full brightness, continuous operation without RC input.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRC Controlled Mode:\u003c\/strong\u003e Connect to any spare servo channel to toggle on\/off and adjust brightness or patterns.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cimg alt=\"Strobon NEO Controller\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0333\/9219\/7763\/files\/1134-thickbox_default_480x480.jpg?v=1628274067\"\u003e\u003c\/p\u003e\n\u003ch3\u003e📡 Standard RC Receiver Connection\u003c\/h3\u003e\n\u003cp\u003e\u003cimg alt=\"RC Receiver Wiring\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0333\/9219\/7763\/files\/1151_480x480.jpg?v=1628274140\"\u003e\u003c\/p\u003e\n\u003ch3\u003e🔋 Standalone Battery Connection\u003c\/h3\u003e\n\u003cp\u003e\u003cimg alt=\"Standalone Power Wiring\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0333\/9219\/7763\/files\/1152_480x480.jpg?v=1628274197\"\u003e\u003c\/p\u003e\n\u003ch3\u003e⚙️ Modes\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003e*Note:\u003c\/strong\u003e Mode switching is available on firmware versions released after 1 April 2015.\u003c\/p\u003e\n\u003cp\u003eNEO displays its active mode at startup using \u003cstrong\u003eRED\u003c\/strong\u003e (Mode 1) or \u003cstrong\u003eGREEN\u003c\/strong\u003e (Mode 2). After this 1-second indicator, it resumes the last used pattern and power level.\u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"Startup Mode Display\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0333\/9219\/7763\/files\/Strobon_NEO_Setup_1_480x480.png?v=1628274287\"\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMode 1 (Brightness Control Only):\u003c\/strong\u003e\u003cbr\u003eUse a switch or knob to control LED brightness and toggle power.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMode 2 (Brightness + Pattern Control):\u003c\/strong\u003e\u003cbr\u003eBrightness is controlled up to 70% servo input. 100% input changes to the next pattern. Ideal with a 3-position switch.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e🧭 Changing Modes\u003c\/h3\u003e\n\u003cp\u003eTo switch modes, press and hold the button before powering on. Once powered, release the button when the LEDs turn \u003cstrong\u003eBLUE\u003c\/strong\u003e. The selected mode is confirmed by a \u003cstrong\u003eRED\u003c\/strong\u003e (Mode 1) or \u003cstrong\u003eGREEN\u003c\/strong\u003e (Mode 2) indicator.\u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"Mode Switching Illustration\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0333\/9219\/7763\/files\/Strobon_NEO_Setup_2_480x480.png?v=1628274348\"\u003e\u003c\/p\u003e\n\u003ch3\u003e⚠️ Warning \u0026amp; Troubleshooting\u003c\/h3\u003e\n\u003cp\u003eAll NEO controllers and LED strips are fully tested before dispatch. Common issues reported are:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eLow\/unstable voltage:\u003c\/strong\u003e Can disrupt LED data signals. Test with a single strip and ensure stable 5V 1A supply.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOver-voltage (above 6V):\u003c\/strong\u003e Can permanently damage LED ICs. This often causes partial strip failure.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMechanical vibration:\u003c\/strong\u003e Can break internal LED connections, especially after crashes or on vibrating frames.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eTip:\u003c\/strong\u003e Press gently on the faulty LED. If colour returns, internal damage is likely and should be replaced.\u003c\/p\u003e\n\u003cp\u003eYou can find \u003ca href=\"http:\/\/www.flytron.com\/12-rc-light-systems\" target=\"_blank\"\u003ecompatible LED strips here\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch3\u003e▶️ Demo Video\u003c\/h3\u003e\n\u003cp\u003e\u003ciframe height=\"315\" width=\"560\" src=\"https:\/\/www.youtube.com\/embed\/5mJffreoQls?rel=0\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003ch3\u003e📐 Specifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eSupply Voltage\u003c\/td\u003e\n\u003ctd\u003e5V (via servo channel or BEC)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temperature\u003c\/td\u003e\n\u003ctd\u003e-40°C to +105°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCurrent Consumption\u003c\/td\u003e\n\u003ctd\u003e50mA to 1A (depending on pattern and brightness)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions (L × W × H)\u003c\/td\u003e\n\u003ctd\u003e24.3mm × 9.2mm × 4mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e5g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003e❓ FAQ\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eHow many LEDs can it drive?\u003c\/strong\u003e\u003cbr\u003eEach output channel supports up to 10 LEDs. With 4 outputs total, that’s 40 LEDs per controller.\u003c\/p\u003e","brand":"Flytron","offers":[{"title":"Controller + 4 Stripes","offer_id":32226714288259,"sku":"STRO-NEO-RC-CONT-RGB-LED-1","price":29.9,"currency_code":"GBP","in_stock":true},{"title":"Controller Only","offer_id":32226714321027,"sku":"STRO-NEO-RC-CONT-RGB-LED-2","price":9.9,"currency_code":"GBP","in_stock":true},{"title":"Single 10 LEDs Stripe","offer_id":32226714353795,"sku":"STRO-NEO-RC-CONT-RGB-LED-3","price":5.9,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0333\/9219\/7763\/products\/1076.jpg?v=1581376908"},{"product_id":"strobon-v2-navigation-light","title":"STROBON v2 Navigation Light","description":"\u003cp\u003e\u003cspan style=\"color: #d0121a;\"\u003e\u003cstrong\u003eThis product is compatible with the latest FAA and CAA anti-collision light regulations for drones. It is visible from at least 3 miles at night.\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eSTROBON lights have long been among the most powerful navigation lights on the model aircraft market.\u003c\/p\u003e\n\u003cp\u003eNow featuring 5 configurable light patterns:\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eStrobe:\u003c\/strong\u003e Classic Strobon V1 effect—three rapid xenon-style flashes.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlink:\u003c\/strong\u003e Simulates belly or tail lights with continuous ON\/OFF pulses.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeartbeat:\u003c\/strong\u003e Smooth ramp-up and ramp-down cycle like a beacon.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRotating Beacon:\u003c\/strong\u003e Simulates a rolling light with ramp up\/flash\/ramp down\/off.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStatic:\u003c\/strong\u003e Constant light—ideal for landing or wing-tip visibility.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003e🔌 \u003cstrong\u003eWorking Modes\u003c\/strong\u003e\n\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eRC Controlled Mode:\u003c\/strong\u003e\u003cbr\u003eConnect to any spare RC channel to toggle the light remotely. Multiple Strobons can be synced on the same channel.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandalone Mode:\u003c\/strong\u003e\u003cbr\u003eDirectly power the unit from a 3.5–6V battery. It will operate continuously in the selected mode.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0333\/9219\/7763\/files\/strobon_v2_site_480x480.png?v=1628275049\" alt=\"Strobon V2 Configurable Strobe\"\u003e\u003c\/p\u003e\n\u003ch3\u003e🎨 \u003cstrong\u003eColour Selection\u003c\/strong\u003e\n\u003c\/h3\u003e\n\u003cp\u003eDifferent LED colours have varying visibility and energy efficiency due to human eye limitations and LED chemistry. Based on long-term use:\u003c\/p\u003e\n\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003e\u003cspan style=\"color: #484444;\"\u003eWHITE\u003c\/span\u003e\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eHighest visibility and efficiency\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003e\u003cspan style=\"color: #ff8000;\"\u003eYELLOW\u003c\/span\u003e\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eComparable to white with improved mist penetration\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003e\u003cspan style=\"color: #ff2a00;\"\u003eRED\u003c\/span\u003e\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eSecond-best visibility, same efficiency as white. Ideal for warning\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003e\u003cspan style=\"color: #2dab23;\"\u003eGREEN\u003c\/span\u003e\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eThird in visibility. Ideal for RED\/GREEN left-right navigation pairing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003e\u003cspan style=\"color: #2b00ff;\"\u003eBLUE\u003c\/span\u003e\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eLowest visibility and efficiency. Recommended only for special applications\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eIR 850nm\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eVisible to night vision devices and some night-mode cameras\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eIR 940nm\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eOnly visible to night vision devices. Completely invisible to the naked eye\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cstrong\u003eBottom line:\u003c\/strong\u003e White and Red are best for visibility. Green is good for orientation. Blue is for niche uses.\u003c\/p\u003e\n\u003ch3\u003e⚙️ \u003cstrong\u003eSpecifications\u003c\/strong\u003e\n\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSupply Voltage: 3.5–6V\u003c\/li\u003e\n\u003cli\u003eCurrent Consumption @5V:\u003cbr\u003e- Strobe: 60mA avg (~1A peak)\u003cbr\u003e- Blink: 70mA avg (150mA ON)\u003cbr\u003e- Heartbeat: 120mA\u003cbr\u003e- Rolling Beacon: 170mA (~1A peak)\u003cbr\u003e- Static: 140mA\u003c\/li\u003e\n\u003cli\u003eDiameter: 21.5mm\u003c\/li\u003e\n\u003cli\u003eHeight: 6mm\u003c\/li\u003e\n\u003cli\u003eScrew Holes: 1.5mm diameter, 18mm apart\u003c\/li\u003e\n\u003cli\u003eWeight: 1.5g (without wires)\u003c\/li\u003e\n\u003cli\u003eWire Length: 20cm (if “with wire” option selected)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e🧩 \u003cstrong\u003eAccessories\u003c\/strong\u003e\n\u003c\/h3\u003e\n\u003cp\u003eWe strongly recommend using our \u003ca href=\"http:\/\/www.flytron.com\/products\/strobon-v2-polycarbonate-lens\" style=\"color: #2c9ffd;\"\u003ecustom polycarbonate lenses\u003c\/a\u003e for optimal performance and protection.\u003c\/p\u003e\n\u003ch3\u003e🎛️ \u003cstrong\u003ePattern Selection\u003c\/strong\u003e\n\u003c\/h3\u003e\n\u003cp\u003eTo change the strobe pattern, briefly connect the two small pads on the Strobon V2 board while it is powered ON. It will stop, then resume in the next pattern when the pads are released.\u003c\/p\u003e\n\u003cp\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/85ATkWa9MOs\" width=\"501\" height=\"282\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0333\/9219\/7763\/files\/strobon_v2_settings_240x240.png?v=1581600408\" alt=\"Strobon V2 Settings\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0333\/9219\/7763\/files\/airplane_navigation_light_locations_480x480.png?v=1581600498\" alt=\"Navigation Light Locations\"\u003e\u003c\/p\u003e\n\u003ch3\u003e📡 \u003cstrong\u003eSchematic: RC Controlled Mode\u003c\/strong\u003e\n\u003c\/h3\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0333\/9219\/7763\/files\/Strobon_Standard_s_480x480.png?v=1581600540\" alt=\"RC Receiver Wiring\"\u003e\u003c\/p\u003e\n\u003ch3\u003e🎮 \u003cstrong\u003eRC Channel Settings\u003c\/strong\u003e\n\u003c\/h3\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0333\/9219\/7763\/files\/shutter_positions_3_240x240.png?v=1581600598\" alt=\"RC Channel Configuration\"\u003e\u003c\/p\u003e\n\u003ch3\u003e🔋 \u003cstrong\u003eSchematic: Standalone Mode\u003c\/strong\u003e\n\u003c\/h3\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0333\/9219\/7763\/files\/Strobon_Standard_480x480.png?v=1581600627\" alt=\"Strobon Standalone Usage\"\u003e\u003c\/p\u003e\n\u003ch3\u003e▶️ \u003cstrong\u003eCustomer Videos\u003c\/strong\u003e\n\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eSteven – Tarot X6\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/yFfPAs6PpYc?rel=0\" width=\"500\" height=\"281\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFernando\u003c\/strong\u003e\u003cbr\u003e\u003cem\u003eInstructions and wiring details available in the video description.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/6XMfcZfgWTI?rel=0\" width=\"500\" height=\"281\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eStan\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/_YqbogW3NLs?rel=0\" width=\"496\" height=\"279\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e","brand":"Flytron","offers":[{"title":"White \/ without cable","offer_id":32120645779587,"sku":"STRO-V2-NAVI-LIGH-1","price":6.49,"currency_code":"GBP","in_stock":true},{"title":"White \/ with cable","offer_id":32120645812355,"sku":"STRO-V2-NAVI-LIGH-2","price":7.99,"currency_code":"GBP","in_stock":true},{"title":"Red \/ without cable","offer_id":32120645845123,"sku":"STRO-V2-NAVI-LIGH-3","price":6.49,"currency_code":"GBP","in_stock":true},{"title":"Red \/ with cable","offer_id":32120645910659,"sku":"STRO-V2-NAVI-LIGH-4","price":7.99,"currency_code":"GBP","in_stock":true},{"title":"Green \/ without cable","offer_id":32120645943427,"sku":"STRO-V2-NAVI-LIGH-5","price":6.49,"currency_code":"GBP","in_stock":true},{"title":"Green \/ with cable","offer_id":32120645976195,"sku":"STRO-V2-NAVI-LIGH-6","price":7.99,"currency_code":"GBP","in_stock":true},{"title":"Blue \/ without cable","offer_id":32120646008963,"sku":"STRO-V2-NAVI-LIGH-7","price":6.49,"currency_code":"GBP","in_stock":true},{"title":"Blue \/ with cable","offer_id":32120646041731,"sku":"STRO-V2-NAVI-LIGH-8","price":7.99,"currency_code":"GBP","in_stock":true},{"title":"Amber\/Yellow \/ without cable","offer_id":32120646074499,"sku":"STRO-V2-NAVI-LIGH-9","price":6.49,"currency_code":"GBP","in_stock":true},{"title":"Amber\/Yellow \/ with cable","offer_id":32120646107267,"sku":"STRO-V2-NAVI-LIGH-10","price":7.99,"currency_code":"GBP","in_stock":true},{"title":"IR 850nm \/ without cable","offer_id":32120646140035,"sku":"STRO-V2-NAVI-LIGH-11","price":6.49,"currency_code":"GBP","in_stock":true},{"title":"IR 850nm \/ with cable","offer_id":32120646172803,"sku":"STRO-V2-NAVI-LIGH-12","price":7.99,"currency_code":"GBP","in_stock":true},{"title":"IR 940nm \/ without cable","offer_id":32120646205571,"sku":"STRO-V2-NAVI-LIGH-13","price":6.49,"currency_code":"GBP","in_stock":true},{"title":"IR 940nm \/ with cable","offer_id":32120646238339,"sku":"STRO-V2-NAVI-LIGH-14","price":7.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0333\/9219\/7763\/products\/1174.jpg?v=1581376918"},{"product_id":"strobon-standalone","title":"STROBON Standalone","description":"\u003ctable style=\"width: 100%;\" border=\"1\" cellpadding=\"5\" bgcolor=\"#D0E4F5\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003e \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0333\/9219\/7763\/files\/flag-400_50x50.png?v=1640088823\" alt=\"\" style=\"vertical-align: middle;\"\u003e   EU Customers! You can find this product on \u003ca href=\"https:\/\/www.copter.eu\/fts.php?criteria=strobon\"\u003eCopter.eu\u003c\/a\u003e \u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cspan style=\"color: #d0121a;\"\u003e\u003cstrong\u003eThis product is compatible with the latest FAA and CAA anti-collision lights rules for drones. It can be seen from at least 3 miles at night.\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWe are manufacturing the Cree® version of this product right now.\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003ePlease visit the product page for the brightest Strobon ever:\u003c\/strong\u003e\u003cbr\u003e\u003cspan style=\"color: #2c9ffd;\"\u003e\u003cstrong\u003e\u003ca href=\"http:\/\/www.flytron.com\/collections\/led-light-systems\/products\/strobon-cree-standalone\" target=\"_blank\"\u003ehttp:\/\/www.flytron.com\/led-systems\/322-strobon-cree-standalone.html\u003c\/a\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e📝 \u003cstrong\u003eProduct Description\u003c\/strong\u003e\n\u003c\/h3\u003e\n\u003cp\u003eStrobon Standalone is a practical navigation strobe solution for enclosed drones such as:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDJI (Phantom, Inspire, Mavic, Spark, Mavic Air, Mavic Mini and others)\u003c\/li\u003e\n\u003cli\u003eParrot\u003c\/li\u003e\n\u003cli\u003esenseFly\u003c\/li\u003e\n\u003cli\u003eXiaomi\u003c\/li\u003e\n\u003cli\u003e3DR Solo\u003c\/li\u003e\n\u003cli\u003eWalkera and others\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cem\u003eThis product weighs less than 4 grams, and DJI Mini (1\/2) drones can carry two units without affecting balance or exceeding the 250g limit.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch3\u003e🔌 \u003cstrong\u003eNo Cable, No Fuss\u003c\/strong\u003e\n\u003c\/h3\u003e\n\u003cp\u003eJust attach it to your drone or model aircraft using the included 15mm \u003ca href=\"https:\/\/flytron.com\/collections\/led-light-systems\/products\/3m-dual-lock-15mm-round-fastener-for-dji-mini-1-2-motor-mount\" target=\"_blank\"\u003e\u003cstrong\u003e3M Dual Lock fasteners\u003c\/strong\u003e\u003c\/a\u003e or your preferred glue\/Velcro. Press the button to turn it on—no setup required.\u003c\/p\u003e\n\u003cp\u003eThese fasteners provide a secure, vibration- and dust-resistant attachment.\u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"3M DualLock Fasteners on DJI Mini 2 and Strobon C-1 Strobe Lights\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0333\/9219\/7763\/files\/IMG_20210524_103658_3m_480x480.png?v=1621852945\"\u003e \u003cem\u003eUnder the rear motor mount installation to increase day and night visibility from the ground.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"Strobon C-1 on DJI Mini 2\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0333\/9219\/7763\/files\/IMG_20210524_104017_480x480.jpg?v=1621853973\"\u003e \u003cem\u003eDrone top installation for warning nearby aircraft.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch3\u003e⚙️ \u003cstrong\u003eFeatures\u003c\/strong\u003e\n\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e5 hours of continuous operation with onboard battery\u003c\/li\u003e\n\u003cli\u003ePowerful 3W LED\u003c\/li\u003e\n\u003cli\u003eNo cabling required\u003c\/li\u003e\n\u003cli\u003eEasy-to-use single button interface\u003c\/li\u003e\n\u003cli\u003eOnboard battery status and charge indicator system\u003c\/li\u003e\n\u003cli\u003eCompatible with all 5V MicroUSB cables and chargers (cable not included)\u003c\/li\u003e\n\u003cli\u003eContact pads (L+ and L-) for external LED support\u003c\/li\u003e\n\u003cli\u003eBattery includes internal overcharge and discharge protection\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e🎨 \u003cstrong\u003eColour Selection\u003c\/strong\u003e\n\u003c\/h3\u003e\n\u003cp\u003eDue to human eye limitations and LED technology, each colour has different visibility and energy efficiency. Based on our long-term testing:\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #ffffff; background-color: #4a4a4a;\"\u003e\u003cstrong\u003eWHITE:\u003c\/strong\u003e\u003c\/span\u003e Best visibility and efficiency.\u003cbr\u003e\u003cspan style=\"background-color: #dbc834;\"\u003e\u003cstrong\u003eYELLOW:\u003c\/strong\u003e\u003c\/span\u003e Similar to white but with better mist penetration.\u003cbr\u003e\u003cspan style=\"background-color: #d0121a; color: #ffffff;\"\u003e\u003cstrong\u003eRED:\u003c\/strong\u003e\u003c\/span\u003e Second-best visibility. Equal efficiency to white and excellent for warnings.\u003cbr\u003e\u003cspan style=\"background-color: #218e53; color: #ffffff;\"\u003e\u003cstrong\u003eGREEN:\u003c\/strong\u003e\u003c\/span\u003e Third-best for visibility and efficiency. Standard for left\/right navigation.\u003cbr\u003e\u003cspan style=\"background-color: #0044ff; color: #ffffff;\"\u003e\u003cstrong\u003eBLUE:\u003c\/strong\u003e\u003c\/span\u003e Least visibility. Not recommended for warning or navigation—best for special use.\u003cbr\u003e\u003cstrong\u003eIR 850nm:\u003c\/strong\u003e Visible to night vision goggles and night-mode cameras.\u003cbr\u003e\u003cstrong\u003eIR 940nm:\u003c\/strong\u003e Visible to night vision goggles only. Invisible to the human eye; limited camera detection.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBottom line:\u003c\/strong\u003e White and Red are best for long-range visibility. Green helps identify orientation. Blue is for specialised applications only.\u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"Strobon Standalone Example\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0333\/9219\/7763\/products\/strobon_standalone_il.jpg?v=1581599268\"\u003e\u003c\/p\u003e\n\u003ch3\u003e🔋 \u003cstrong\u003eUsage\u003c\/strong\u003e\n\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBattery Status:\u003c\/strong\u003e Press and release the button while OFF to check status\u003cbr\u003e(1 blink = Charge needed, 2 blinks = OK, 3 blinks = Fully charged)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eON\/OFF:\u003c\/strong\u003e Press and hold for 3 seconds to turn on or off\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCharging:\u003c\/strong\u003e Connect to any micro USB charger or computer port\u003cbr\u003e- Short bursts = Charging\u003cbr\u003e- 1 sec ON \/ 2 sec OFF = Fully charged\u003cbr\u003eCharging time is approx. 2 hours\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e⚠️ \u003cstrong\u003eNotice\u003c\/strong\u003e\n\u003c\/h3\u003e\n\u003cp\u003e\u003cspan style=\"color: #d0121a;\"\u003eThe battery is equipped with a PCM module for overcharge and discharge protection. If the unit shows no signs of life, it may have activated low-voltage protection. Simply recharge to restore operation.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e📐 \u003cstrong\u003eSpecifications\u003c\/strong\u003e\n\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDimensions: 22mm × 18mm × 10mm\u003c\/li\u003e\n\u003cli\u003eWeight: 4g\u003c\/li\u003e\n\u003cli\u003eCurrent Consumption: \u0026lt;15mA per hour\u003c\/li\u003e\n\u003cli\u003eCharge Port: MicroUSB\u003c\/li\u003e\n\u003cli\u003eCharge Current: Max 40mA\u003c\/li\u003e\n\u003cli\u003eCharge Time: Approx. 2 hours\u003c\/li\u003e\n\u003cli\u003eBattery Type: 80mAh LiPo with integrated PCM safety circuit\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Flytron","offers":[{"title":"White","offer_id":32074574364803,"sku":"STRO-STAN-1","price":9.9,"currency_code":"GBP","in_stock":true},{"title":"Red","offer_id":32074574332035,"sku":"STRO-STAN-2","price":9.9,"currency_code":"GBP","in_stock":true},{"title":"Green","offer_id":32074574397571,"sku":"STRO-STAN-3","price":9.9,"currency_code":"GBP","in_stock":true},{"title":"Blue","offer_id":32074574430339,"sku":"STRO-STAN-4","price":9.9,"currency_code":"GBP","in_stock":true},{"title":"Yellow","offer_id":32074574528643,"sku":"STRO-STAN-5","price":9.9,"currency_code":"GBP","in_stock":true},{"title":"IR 850nm","offer_id":32074574463107,"sku":"STRO-STAN-6","price":10.9,"currency_code":"GBP","in_stock":true},{"title":"IR 940nm","offer_id":32074574495875,"sku":"STRO-STAN-7","price":10.9,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0333\/9219\/7763\/products\/1234.jpg?v=1581376928"},{"product_id":"strobon-cree-standalone","title":"STROBON Cree® Standalone","description":"\u003cp\u003e\u003cspan style=\"color: #d0121a;\"\u003e\u003cstrong\u003eThis product is compatible with the latest FAA and CAA anti-collision lights rules for drones. It can be seen from at least 3 miles at night.\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eStrobon Cree® Standalone is the \u003cstrong\u003ebrightest\u003c\/strong\u003e navigation strobe solution for enclosed drones like:\u003cbr\u003e \u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDJI (Phantom, Inspire, Mavic, Spark, Mavic Air, Mavic Minii Mavic Mini 2 and others)\u003c\/li\u003e\n\u003cli\u003eParrot\u003c\/li\u003e\n\u003cli\u003esenseFly\u003c\/li\u003e\n\u003cli\u003eXiaomi\u003c\/li\u003e\n\u003cli\u003e3DR Solo\u003c\/li\u003e\n\u003cli\u003eWalkera and others...\u003cbr\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cem\u003eThis product is less than 4 grams and DJI Mini (1\/2) drones can carry 2 of them without any balance problem and still remain under 250 grams.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003eNo cable, no fuss\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003eJust attach it to your drone or model aeroplane by using our new 15mm \u003cspan style=\"color: #2c9ffd;\"\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/flytron.com\/collections\/led-light-systems\/products\/3m-dual-lock-15mm-round-fastener-for-dji-mini-1-2-motor-mount\" target=\"_blank\"\u003e3M Dual Lock fasteners\u003c\/a\u003e \u003c\/strong\u003e\u003c\/span\u003e(It is included) or your favourite glue\/velcro, and press the button to turn it ON. That's all.  \u003cbr\u003e\u003cbr\u003eOur 15mm 3M Dual Lock fasteners(included since Jan-2022) are providing an easy, vibration and dust-proof attachment solution.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"3M DualLock Fasteners on DJI Mini 2 and Strobon C-1 Strobe Lights\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0333\/9219\/7763\/files\/IMG_20210524_103658_3m_480x480.png?v=1621852945\"\u003e\u003cbr\u003e\u003cem data-mce-fragment=\"1\"\u003eUnder the rear motor mount installation to increase day and night visibility from the ground.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"Strobon C-1 on DJI Mini 2\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0333\/9219\/7763\/files\/IMG_20210524_104017_480x480.jpg?v=1621853973\"\u003e\u003cbr\u003e\u003cem\u003eDrone top installation for warning the nearby aircraft. (photo shows the Strobon C-1 Cree Light)\u003c\/em\u003e\u003c\/p\u003e\n\u003ch3\u003e\n\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e\n\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e2+ hours of continuous operation with onboard battery.\u003c\/li\u003e\n\u003cli\u003ePowerful Cree® Standalone LED\u003c\/li\u003e\n\u003cli\u003eNo Cabling required \u003c\/li\u003e\n\u003cli\u003eEasy to use single-button interface.\u003c\/li\u003e\n\u003cli\u003eOnboard battery status and charge indicator system.\u003c\/li\u003e\n\u003cli\u003eCompatible with all 5V MicroUSB cables and chargers. (cable not included)\u003c\/li\u003e\n\u003cli\u003eContact Pads(L+ and L-) for external LED support.\u003c\/li\u003e\n\u003cli\u003eBattery with internal overcharge and discharge protection.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e    \u003c\/h3\u003e\n\u003ch3\u003e\n\u003cstrong\u003eColour Selection\u003c\/strong\u003e \u003c\/h3\u003e\n\u003cp\u003eBecause of the human eye's limitations, Every colour has different visibility and energy transfer rate. \u003cbr\u003eAlso, every LED colour has different chemical compounds and efficiency.\u003cbr\u003eAccording to our experience in years;\u003cbr\u003e \u003cbr\u003e\u003cspan style=\"background-color: #000000; color: #d4d4d4;\"\u003e\u003cstrong\u003eWHITE: \u003c\/strong\u003e\u003c\/span\u003e  The best visibility and efficiency. \u003cbr\u003e\u003cstrong\u003e\u003cspan style=\"color: #d4d4d4; background-color: #d0121a;\"\u003eRED: \u003c\/span\u003e\u003c\/strong\u003e       2nd in visibility and efficiency is the same as white but the best for the warning. \u003cbr\u003e\u003cstrong\u003e\u003cspan style=\"background-color: #218e53; color: #d4d4d4;\"\u003eGREEN: 3rd\u003c\/span\u003e\u003c\/strong\u003e in visibility and efficiency.  Best for Standard RED\/GREEN (Left\/Right) navigation usage.\u003cbr\u003e\u003cstrong\u003e\u003cspan style=\"background-color: #2445a2; color: #d4d4d4;\"\u003eBLUE:\u003c\/span\u003e\u003c\/strong\u003e      4th in visibility and also the efficiency.  We are not suggesting this colour for warning or navigation but for special usage. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBottom line:\u003c\/strong\u003e White and Red is the best option if you need long-range visible strobes. And you can use green to identify your flying platform direction. Blue is only for special applications. \u003cbr\u003e \u003cbr\u003e    \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0333\/9219\/7763\/products\/strobon_cree_il.jpg?v=1581598173\"\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003eUsage\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBATTERY STATUS:\u003c\/strong\u003e Press the button then release it to learn the battery status when it is OFF.\u003cbr\u003e(1 blink: Need Charge, 2 blinks: It's OK, 3 blinks: Fully Charged)\u003cbr\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eON\/OFF:\u003c\/strong\u003e Press and hold the button for 3 seconds to turn ON or OFF\u003cbr\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCHARGE:\u003c\/strong\u003e Plug it into any micro USB charger or computer port when charging is required.\u003cbr\u003e- The LED will blink in very short bursts when charging.\u003cbr\u003e- The LED will blink with a 1-second ON \/ 2 seconds OFF pattern when the battery is fully charged. \u003cbr\u003eIt takes 2 hours to empty batteries.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e  \u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #d0121a;\"\u003eNotice:\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #d0121a;\"\u003eThe battery includes its own PCM module. This module protects the battery from overcharging and discharging for a long lifespan. If there is no life sign on the circuit when you press the button, probably discharge protection has been activated because of low battery voltage. Just charge it to turn it on.\u003c\/span\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003e\n\u003cstrong\u003eSpecifications\u003c\/strong\u003e \u003c\/h3\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDimensions: 20mm x 16mm x 8mm\u003c\/li\u003e\n\u003cli\u003eWeight: 4gr\u003c\/li\u003e\n\u003cli\u003eCurrent Consumption: \u0026lt;30mA per hour\u003c\/li\u003e\n\u003cli\u003eCharge Port: MicroUSB\u003c\/li\u003e\n\u003cli\u003eCharge Current: 40mA max. \u003c\/li\u003e\n\u003cli\u003eCharge Time: ~2 hours\u003c\/li\u003e\n\u003cli\u003eBattery Type: 100mA LiPo Battery with the safe and reliable PCM circuit.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e    \u003c\/p\u003e\n\u003cp\u003e     \u003c\/p\u003e\n\u003cp\u003eSome breathtaking information about what you can do with these lights :)\u003cbr\u003e\u003cbr\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/SEz70ClCetM?rel=0\" width=\"560\" height=\"315\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e","brand":"Flytron","offers":[{"title":"White","offer_id":32074574758019,"sku":"CREE_WH","price":12.4,"currency_code":"GBP","in_stock":true},{"title":"Red","offer_id":32074574725251,"sku":"CREE_RD","price":12.4,"currency_code":"GBP","in_stock":true},{"title":"Green","offer_id":32074574790787,"sku":"CREE_GR","price":12.4,"currency_code":"GBP","in_stock":true},{"title":"Blue","offer_id":32074574823555,"sku":"CREE_BL","price":12.4,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0333\/9219\/7763\/products\/1252.jpg?v=1581376940"},{"product_id":"fm10x-micro-800tvl-zoom-camera","title":"FM10X Micro 800TVL Zoom Camera with Infrared sensitive CCD","description":"\u003cp\u003eFM10X 800TVL is our brand new 10x zoom camera with 800TVL resolution and NVP2431H Image Processor for small UAV and remote surveillance.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e10X Quality optics, 1\/3\" CCD and NVP2431H Image Processor technology making this camera are unique. The low light performance of the FM36X 800TVL is excellent because of the onboard motorized Day\/Night filter shutter. You can choose the night mode to remove the IR filter for NIR band video surveillance.\u003cbr\u003e\u003cbr\u003ein ISP technology, 1080HD resolution image sensor and NVP2431H Image Processor generates the highest resolution video as possible to transmit over analogue video transmitters.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe Noise reduction system eliminates the noises and gives perfect gradients and sharp edges.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eThe photo below, captured from FM10X video, press on the photo to see the real captured image. The original image noise level and quality are 2 times better than this captures. We can't show it because of the limitations of capture devices that we have. \u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"night shot\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0333\/9219\/7763\/files\/fm10x-micro-700tvl-zoom-camera_75ba3e54-e934-4641-a0ac-6fa24cc37bf9.jpg?v=1582195587\"\u003e\u003c\/p\u003e\n\u003cp\u003eThe product comes with new CAMCON v4 boards (below).  The new inline design is more gimbal friendly than the older versions. \u003cbr\u003eZoom, Focus and Menu inputs compatible with standard 5v RC Servo ports. (1 channel enough for zoom, 3 channel require for zoom, focus and menu functions)  \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0333\/9219\/7763\/products\/FM10X800__3_480x480.jpg?v=1582195148\"\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003ciframe height=\"315\" width=\"560\" src=\"\/\/www.youtube.com\/embed\/vhY2dBlbciU\" frameborder=\"0\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 10pt;\"\u003eFM10X Video Performance under indoor light\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ciframe height=\"315\" width=\"560\" src=\"\/\/www.youtube.com\/embed\/VQXXZ-OlCW0\" frameborder=\"0\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003e \u003cstrong\u003eThe package includes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eFM36X700 Mini Zoom Camera\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eFlat camera cable\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eRC Camera Control Card v4.0 (including zoom, focus and menu functions over servo channels)\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eMENU OPTIONS\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/92nwsCIMdFM\" height=\"315\" width=\"560\" allowfullscreen=\"\" allow=\"accelerometer; autoplay; encrypted-media; gyroscope; picture-in-picture\" frameborder=\"0\"\u003e\u003c\/iframe\u003e\u003c\/div\u003e\n\u003cdiv\u003e \u003c\/div\u003e\n\u003cdiv\u003e\n\u003cspan\u003e\u003cstrong\u003eCAMERA CONNECTION\u003cbr\u003e\u003c\/strong\u003e\u003c\/span\u003eClick the image for zoom\u003cbr\u003e\u003cimg alt=\"wiring\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0333\/9219\/7763\/files\/Camera_Connection.png?v=1582195458\"\u003e \u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003e \u003c\/div\u003e\n\u003cdiv\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eFeatures of FM10X7800:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003e1\/3\" 1080H SuperHAD CCDII  Image Sensor\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eNextchip NVP2431H Image Processor\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e800 TV Lines Video Resolution\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eMotorized Day\/Night IR filter (Automatic or manual selectable)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e2D Noise Reduction\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eColor: 0.1Lux, B\/W: 0.01Lux\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eHigh-Speed Focus function over ISP\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e1\/50~1\/10000 s Shutter Speed\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e-20 to +70 Celcius Working Temperature\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eMenu Functions: AWB, Backlight Compensation, Mirror, PAL\/NTSC selection, IR Filter controls etc.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eVideo Format: PAL\/NTSC\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 10pt;\"\u003eWeight: 53gr  naked. \/ 108gr with the metal shield.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 10pt;\"\u003eDimensions: 60x36x40mm\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 10pt;\"\u003eOptical Zoom Factor: 10x (3.9mm - 39mm)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eFocus\/Iris: AUTO \/ MANUAL \/ K AUTO\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eBacklight Compensation\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eDigital Control Protocol: VISCA \u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eRC servo channel control: Zoom control with autofocus\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eSuper Infrared (720-950nm) sensitivity for IR Filters\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eSupply Voltage is 12volt, also works with 3S LiPO (11.1V)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e190mA power consumption\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003c\/div\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 10pt; color: #d0121a;\"\u003e\u003cstrong\u003eImportant Notice\u003c\/strong\u003e: FM10X is not a standard FPV camera, We are manufacturing it for UAV designers by request. If you need 5 or more units or Out of stock please \u003ca href=\"https:\/\/store.flytron.com\/pages\/contact-us\"\u003e\u003cspan style=\"color: #d0121a;\"\u003econtact us\u003c\/span\u003e\u003c\/a\u003e. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Flytron","offers":[{"title":"PAL","offer_id":32074575544451,"sku":"FM10X-MICR-800TVL-ZOOM-1","price":148.2,"currency_code":"GBP","in_stock":true},{"title":"NTSC","offer_id":32074575577219,"sku":"FM10X-MICR-800TVL-ZOOM-2","price":148.2,"currency_code":"GBP","in_stock":false},{"title":"Replacement Control Card Only","offer_id":39721739878589,"sku":"FM10X-MICR-800TVL-ZOOM-3","price":45.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0333\/9219\/7763\/products\/1322.jpg?v=1581376990"},{"product_id":"dronethermal-v3-micro-uav-thermal-camera","title":"DroneThermal v4 Micro UAV Thermal Camera","description":"\u003ch1 style=\"text-align: center;\"\u003e\n\u003cspan style=\"color: #ff2a00;\"\u003e\u003cstrong\u003e\u003cspan style=\"background-color: #e9e9e9;\"\u003e\u003c\/span\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\n\u003c\/h1\u003e\n\u003ch1 style=\"text-align: center;\"\u003e\n\u003cspan style=\"color: #ff2a00;\"\u003e\u003cstrong\u003e\u003cspan style=\"background-color: #e9e9e9;\"\u003e\u003c\/span\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\n\u003c\/h1\u003e\n\u003cp\u003e\u003cstrong\u003eDroneThermal is the first micro size \u0026amp; low-cost analogue thermal camera for small UAVs and surveillance.\u003cbr\u003e  \u003cbr\u003e\u003c\/strong\u003eDroneThermal v4 is only\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003e2.3grams\u003c\/strong\u003e without the Lepton Core\u003cspan\u003e \u003c\/span\u003eand the dimensions are\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003e20x20x10mm\u003c\/strong\u003e \u003cbr\u003e  \u003cbr\u003eIt is based on FLIR's revolutionary low-cost 160x120 \/ 80x60 pixel Lepton thermal cores. \u003cbr\u003e \u003cbr\u003eThe video frame rate and resolution are not much but the price is perfect for the civilian small drone hobbyists.\u003cbr\u003eAlso, it is fully legal because of the \u0026lt;9hz thermal core design. \u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #2c9ffd;\"\u003e\u003ca href=\"http:\/\/www.flir.com\/uploadedFiles\/CVS_Americas\/Cores_and_Components_NEW\/Products\/Uncooled_Cores\/Lepton\/FLIR-Lepton-DataBrief.pdf\"\u003eClick here\u003c\/a\u003e\u003c\/span\u003e for more information about the Lepton thermal cores.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff0404;\"\u003e*We are not stocking FLIR Lepton cores regularly. \u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"color: #ff0404;\"\u003ePlease search on the OEM market or contact your local FLIR Distributor for the Lepton thermal cores. \u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"color: #ff0404;\"\u003eAll FLIR Lepton cores are push-fit compatible with our camera body.\u003c\/span\u003e  \u003cbr\u003e\u003cbr\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/eAxDrWSUIRc?si=TdIugyxpy4MKqlMW\" title=\"YouTube video player\"\u003e\u003c\/iframe\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch1\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eColour Palettes\u003c\/strong\u003e\u003c\/span\u003e\u003c\/h1\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eIron Black\u003cbr\u003e\u003cimg alt=\"Iron Black Thermal Palette\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0333\/9219\/7763\/files\/iron_black_480x480.png?v=1610310013\"\u003e\u003c\/strong\u003e\u003cbr\u003eDefault palette of DroneThermal v4 cameras and it's designed for body heat detection.\u003cbr\u003e\u003cspan\u003eHighlighting the warmest 20% of a scene in a mix of vibrant yellows and purples, while the cooler 80% is in black and white. Iron Black is best suited for high-contrast environments and offers the best life detection.\u003cbr\u003e\u003c\/span\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIronbow\u003cbr\u003e\u003cimg alt=\"Iron Bow Thermal Palette\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0333\/9219\/7763\/files\/ironbow_480x480.png?v=1610310022\"\u003e\u003c\/strong\u003e\u003cbr\u003e\u003cspan\u003eA general-purpose palette that quickly identifies thermal anomalies and body heat, Ironbow uses colour to show heat distribution and subtle details. Hot objects are shown in lighter, warm colours while colder objects are dark, cool colours.\u003cbr\u003e\u003c\/span\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGlowbow\u003cbr\u003e\u003cimg alt=\"Glowbow Thermal Palette\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0333\/9219\/7763\/files\/glowbow_480x480.png?v=1610310053\"\u003e\u003c\/strong\u003e\u003cbr\u003e\u003cspan\u003eGlowbow is the black-yellow version of White Hot, displaying warmer objects in bright yellow tones and cooler objects in dark red. \u003cbr\u003e\u003c\/span\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRainbow HC\u003cbr\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0333\/9219\/7763\/files\/rainbow_hc_480x480.png?v=1610310036\" alt=\"Rainbow HC  Thermal Palette\"\u003e\u003c\/strong\u003e\u003cbr\u003e\u003cspan\u003eUsing different colours to display minute temperature differences, Rainbow HC is best suited for scenes with minimal heat change. Focusing on an area with similar heat energy allows the Rainbow HC to detect objects and slight temperature changes despite low-contrast conditions.\u003cbr\u003e\u003c\/span\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhite Hot\u003cbr\u003e\u003cimg alt=\"Hot White Thermal Palette\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0333\/9219\/7763\/files\/white_hot_480x480.png?v=1610310042\"\u003e\u003c\/strong\u003e\u003cbr\u003e\u003cspan\u003eThe most commonly used palette, White Hot displays warmer objects in white and cooler objects in black. Grayscale palettes offer simplicity for scenes with a wide temperature span and generate images with realistic details. The versatility of White Hot makes it appealing for use in shifting landscapes and urban areas.\u003cbr\u003e\u003c\/span\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlack Hot\u003cbr\u003e\u003cimg alt=\"Hot Black Thermal Palette\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0333\/9219\/7763\/files\/black_hot_480x480.png?v=1610310047\"\u003e\u003c\/strong\u003e\u003cbr\u003e\n\u003cp\u003eBlack Hot is the inverted version of White Hot, displaying warmer objects as black and cooler objects as white. A favourite among law enforcement and hunters, Black Hot displays body heat in a clear, lifelike image.\u003c\/p\u003e\n\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutdoor Alert\u003cbr\u003e\u003cimg alt=\"Outdoor Alert Thermal Palette\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0333\/9219\/7763\/files\/outdoor_alert_480x480.png?v=1610310027\"\u003e\u003c\/strong\u003e\u003cbr\u003e\u003cspan\u003eOutdoor Alert was designed for one purpose—quickly detecting body heat. Highlighting the warmest 10% of a scene in a mix of vibrant oranges and yellows, Outdoor Alert is best suited for high-contrast environments and offers stellar nighttime body heat detection.\u003cbr\u003e\u003cbr\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRain Gradient\u003cbr\u003e\u003cimg alt=\"Rain Gradient Thermal Palette\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0333\/9219\/7763\/files\/Rain_Gradient_480x480.png?v=1610310031\"\u003e\u003c\/strong\u003e\u003cbr\u003e\u003cspan\u003eHigher contrast version of the Rainbow HC palette.\u003cbr\u003eBest suited to detect objects and slight temperature changes despite low-contrast conditions.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003e\u003cspan style=\"text-decoration: underline;\"\u003eDroneThermal Connection \u0026amp; Settings  \u003c\/span\u003e\u003c\/h2\u003e\n\u003ch3\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0333\/9219\/7763\/files\/dronethermal_4_480x480.png?v=1610190696\" alt=\"DroneThermal Camera Wiring Schematic\"\u003e\u003c\/h3\u003e\n\u003cp\u003eDroneThermal has a mode button, a Green LED and a 6-pin 1.5mm pitch Micro JST connector on the back for the settings etc.\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch3\u003ePower Supply Inputs: VDD(+) \/ GND(-) \u003c\/h3\u003e\n\u003cp\u003eThe camera circuit is designed to work with 1S LiPo (3.5-4.2 volts). The absolute maximum supply voltage is 5.5 volts. The input voltage regulator will burn above this voltage but protects the thermal core from any damage. The reverse polarity connection also burns the regulator in the same way. Please double-check your connection before powering on the camera.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003eVideo Output\u003c\/h3\u003e\n\u003cp\u003eThe Video Output of the camera (yellow wire) is the standard analogue video output(75Ω). So you can connect it to your monitor or video gears directly.\u003cbr\u003eThe previous firmware (v4.1) is supporting PAL output only. \u003cbr\u003eThe current firmware (v4.2) supports NTSC and PAL outputs with increased colour pallet resolution. \u003c\/p\u003e\n\u003ch3\u003e\n\u003cspan\u003ePAL\/NTSC Mode Change\u003c\/span\u003e\u003cbr\u003e\n\u003c\/h3\u003e\n\u003cp\u003e\u003cspan\u003eYou can toggle between PAL and NTSC modes by connecting the AUX button to the Ground before powering up the board.  \u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eConnect the AUX pin to the Ground(-) pin\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003eConnect the power supply\u003c\/li\u003e\n\u003cli\u003eIt will toggle from one mode to another and display the logo and thermal image\u003c\/li\u003e\n\u003cli\u003eDisconnect the AUX pin.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e  \u003c\/p\u003e\n\u003ch3\u003eMODE Button\u003c\/h3\u003e\n\u003cp\u003e \u003cspan\u003e \u003c\/span\u003e\u003cbr\u003eThe mode button has 3 different roles. \u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eColour Palette Change:\u003c\/strong\u003e Click to select one of the 8 different colour palettes when the camera is on. \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFFC Calibration:\u003c\/strong\u003e Press and hold the button for ~5 seconds to calibrate the camera with a flat surface. (FFC)\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003e\u003cspan style=\"color: #d0121a;\"\u003e(Shutterless Lepton cores cannot record the calibration data into the permanent memory. You should calibrate it every time if required. Horizontal lines on the image are completely normal and they will disappear after FCC)\u003c\/span\u003e\u003c\/strong\u003e\u003cbr\u003e  \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFirmware Update over WiFi:\u003c\/strong\u003e \u003cbr\u003e\n\u003cdiv\u003e- Press and hold the button when the camera is off and power on then release the button to enable the Firmware update mode of the camera.\u003cbr\u003e- The Green LED will blink continuously.  The camera will open a WiFi Access Point for the firmware update.\u003c\/div\u003e\n\u003cdiv\u003e- Connect to WiFi \u003cspan style=\"color: #0171a9;\"\u003e\u003cstrong\u003eSSID:\u003c\/strong\u003e \u003cstrong\u003eDroneThermal\u003c\/strong\u003e\u003c\/span\u003e by using \u003cspan style=\"color: #0070a7;\"\u003e\u003cstrong\u003ePassword: 12345678\u003c\/strong\u003e\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e- visit \u003cstrong\u003e\u003ca href=\"http:\/\/192.168.4.1\"\u003ehttp:\/\/192.168.4.1\u003c\/a\u003e \u003c\/strong\u003e on your web browser. (Chrome recommended)\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e- Upload the Firmware update file. \u003c\/div\u003e\n\u003cdiv\u003e- Your camera will reboot automatically. It takes about 20-60 seconds depending on the WiFi signal quality and the file size.\u003c\/div\u003e\n\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eAUX Input\/Output (Green Wire)\u003c\/h3\u003e\n\u003cp\u003eIt's not active on the current firmware (v4.2). \u003cbr\u003eSee the PAL\/NTSC Mode Change section above.\u003cbr\u003e \u003c\/p\u003e\n\u003ch3\u003eRX \/ TX Serial Port\u003c\/h3\u003e\n\u003cp\u003e115200 baud serial port supports 3.3v TTL signals only. It's for debugging only in the current firmware (v4.1)\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch1\u003e\n\u003cspan style=\"text-decoration: underline;\"\u003e \u003cstrong\u003eApplications\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\n\u003c\/h1\u003e\n\u003cul\u003e\n\u003cli\u003eBuilding isolation and heat leak control\u003c\/li\u003e\n\u003cli\u003eLife detection\u003c\/li\u003e\n\u003cli\u003eNightvision\u003c\/li\u003e\n\u003cli\u003eSurveillance\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch1\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/span\u003e\u003c\/h1\u003e\n\u003cul\u003e\n\u003cli\u003eSupports all 160x120 pixels and 80x60 pixels Lepton thermal cores.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e8 different Colour Palettes for different requirements from surveillance to roof insulation. \u003c\/li\u003e\n\u003cli\u003e2.4ghz WiFi module and the antenna onboard. (only for the firmware updates in the current firmware. The WiFi camera option can be available in the future but not scheduled.)\u003c\/li\u003e\n\u003cli\u003eWeight is only 2.3gr  (without the Lepton core) \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eDimensions: 20mm x 20mm x 10mm\u003c\/li\u003e\n\u003cli\u003e3-wire simple output connection for FPV (V+, Ground, Video Out)\u003c\/li\u003e\n\u003cli\u003eSupply Voltage: 3.3V - 5V (3.6-4.2v 1S LiPo is ideal) \u003c\/li\u003e\n\u003cli\u003eSupply Current: 160mA continuous (350mA when FFC shutter closed)\u003c\/li\u003e\n\u003cli\u003e25Hz PAL \/ 30Hz NTSC video signal output \u003c\/li\u003e\n\u003cli\u003e\u0026lt;9Hz Thermal image refresh rate (Maximum rate of Lepton)\u003c\/li\u003e\n\u003cli\u003eAutomatic Temperature Gain Control\u003c\/li\u003e\n\u003cli\u003eSingle-button interface for the modes and FFC\u003c\/li\u003e\n\u003cli\u003e3.3v TTL Serial port for debugging \u0026amp; future applications\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch1\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eTroubleshooting\u003c\/strong\u003e\u003c\/span\u003e\u003c\/h1\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong style=\"font-size: 1.4em;\"\u003eThe Camera keeps Resetting during the Startup\u003cbr\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv dir=\"auto\"\u003e\n\u003cstrong\u003eReason:\u003c\/strong\u003e The Lepton shutters are draining very high currents in a short period of time. The camera will reset if the power supply can not provide this current.\u003c\/div\u003e\n\u003cdiv dir=\"auto\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv dir=\"auto\"\u003e\n\u003cstrong\u003eSolution; \u003c\/strong\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv dir=\"auto\"\u003e- make sure the supply can provide \u0026gt;500mA instantly\u003c\/div\u003e\n\u003cdiv dir=\"auto\"\u003e- set the output voltage to 4 volts if you are using an adjustable step-down converter power supply. \u003c\/div\u003e\n\u003cdiv dir=\"auto\"\u003e- \u0026gt;1A LDO or Linear voltage regulators are the best option. AMS1117 is a workhorse and you can use the 3.3v or 5v version safely.\u003c\/div\u003e\n\u003cdiv dir=\"auto\"\u003e- keep the wires as short as possible, lab-type power sources will fail because of the long cabling and slow regulation speed.\u003cbr\u003e- DroneThermal boards are designed to supply over 1S LiPo \/ LiIon battery. You can connect them directly without any regulator. \u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong style=\"font-size: 1.4em;\"\u003eThe Camera gets stuck on a grey Flytron Logo\u003cbr\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv dir=\"auto\"\u003e\n\u003cstrong\u003eReason:\u003c\/strong\u003e The Lepton core cannot be found. \u003cbr\u003e\u003cstrong\u003eSolution:\u003c\/strong\u003e Push the Lepton core to the socket correctly. You will feel a click. \u003cbr\u003eThe shutter mechanism is very fragile, you can remove the mechanism before installation. \u003c\/div\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"Flytron","offers":[{"title":"without FLIR Lepton©  Core (Camera Body Only)","offer_id":32075164287107,"sku":"137_1099899095","price":129.9,"currency_code":"GBP","in_stock":true},{"title":"with FLIR Lepton© 3.5 Core","offer_id":39322666008765,"sku":"DRON-V4-MICR-UAV-THER-CAME-1","price":299.9,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0333\/9219\/7763\/products\/IMG_20210308_125100.jpg?v=1615211212"},{"product_id":"fm36x-800tvl-zoom-camera-with-infrared-sensitive-ccd","title":"FM36X 800TVL Zoom Camera with Infrared sensitive CCD","description":"\u003cdiv\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 13px; line-height: 1.5em;\"\u003eFM36X 800TVL is our brand new 36x zoom camera with 800TVL resolution and NVP2431H Image Processor for small UAV and remote surveillance.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 10pt;\"\u003e36X Quality optics, 1\/3\" CCD and NVP2431H Image Processor technology making this camera are unique. The low light performance of the FM36X 800TVL is excellent because of the onboard motorized Day\/Night filter shutter. You can choose the night mode to remove the IR filter for NIR band video surveillance. \u003cbr\u003e\u003cbr\u003ein ISP technology, 1080HD resolution image sensor and NVP2431H Image Processor generates the highest resolution video as possible to transmit over analogue video transmitters.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 10pt;\"\u003eThe Noise reduction system eliminates the noises and gives perfect gradients and sharp edges.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #000000; font-size: 10pt;\"\u003e\u003cstrong\u003eThe photo below, captured from FM10X video, press on the photo to see the real captured image. The original image noise level and quality are 2 times better than this captures. We can't show it because of the limitations of capture devices that we have. \u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"night shot\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0333\/9219\/7763\/files\/fm10x-micro-700tvl-zoom-camera_75ba3e54-e934-4641-a0ac-6fa24cc37bf9.jpg?v=1582195587\"\u003e\u003c\/p\u003e\n\u003cp\u003eThe product comes with new CAMCON v4 boards (below).  The new inline design is more gimbal friendly than the older versions. \u003cbr\u003eZoom, Focus and Menu inputs compatible with standard 5v RC Servo ports. (1 channel enough for zoom, 3 channel require for zoom, focus and menu functions) \u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 10pt;\"\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0333\/9219\/7763\/products\/FM10X800__3_480x480.jpg?v=1582195148\"\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/66IKFctfCkw\" height=\"315\" width=\"560\" allowfullscreen=\"\" allow=\"accelerometer; autoplay; encrypted-media; gyroscope; picture-in-picture\" frameborder=\"0\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003e \u003ciframe src=\"https:\/\/www.youtube.com\/embed\/1yEDEzxOLDQ\" height=\"315\" width=\"560\" allowfullscreen=\"\" allow=\"accelerometer; autoplay; encrypted-media; gyroscope; picture-in-picture\" frameborder=\"0\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 10pt;\"\u003e\u003cstrong\u003eThe package includes:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 10pt;\"\u003eFM36X700 Mini Zoom Camera\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 10pt;\"\u003eFlat camera cable\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 10pt;\"\u003eRC Camera Control Card v4.0 (including zoom, focus and menu functions over servo channels)\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e \u003c\/p\u003e\n\u003cdiv\u003e\n\u003cspan style=\"font-size: 12pt;\"\u003e\u003cstrong\u003eMENU OPTIONS\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/92nwsCIMdFM\" height=\"315\" width=\"560\" allowfullscreen=\"\" allow=\"accelerometer; autoplay; encrypted-media; gyroscope; picture-in-picture\" frameborder=\"0\"\u003e\u003c\/iframe\u003e\u003c\/div\u003e\n\u003cdiv\u003e \u003c\/div\u003e\n\u003cdiv style=\"text-align: start;\"\u003e\n\u003cspan style=\"font-size: 14pt;\"\u003e\u003cstrong\u003eCAMERA CONNECTION\u003cbr\u003e\u003c\/strong\u003e\u003c\/span\u003eClick the image for zoom\u003cbr\u003e\u003cimg style=\"float: none;\" alt=\"wiring\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0333\/9219\/7763\/files\/Camera_Connection.png?v=1582195458\"\u003e \u003c\/div\u003e\n\u003cdiv\u003e\u003c\/div\u003e\n\u003cdiv\u003e \u003c\/div\u003e\n\u003cdiv\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 10pt;\"\u003e\u003cstrong\u003eFeatures of FM36X800:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 10pt;\"\u003e1\/3\" 1080H SuperHAD CCDII  Image Sensor\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 10pt;\"\u003eNextchip NVP2431H Image Processor\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 10pt;\"\u003e800 TV Lines Video Resolution\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 10pt;\"\u003eMotorized Day\/Night IR filter (Automatic or manual selectable)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 10pt;\"\u003e2D Noise Reduction\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 10pt;\"\u003eColor: 0.1Lux, B\/W: 0.01Lux\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 10pt;\"\u003eHigh-Speed Focus function over ISP\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 10pt;\"\u003e1\/50~1\/10000 s Shutter Speed\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 10pt;\"\u003e-20 to +70 Celcius Working Temperature\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 10pt;\"\u003eMenu Functions: AWB, Backlight Compensation, Mirror, PAL\/NTSC selection, IR Filter controls etc.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 10pt;\"\u003eVideo Format: PAL\/NTSC\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 10pt;\"\u003eWeight: 70gr  naked. \/ 130gr with the metal shield.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 10pt;\"\u003eDimensions: 86x42x45mm (naked) 86x50x47mm(with shield)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 10pt;\"\u003eOptical Zoom Factor: 36x (3.43mm - 123mm)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 10pt;\"\u003eFocus\/Iris: AUTO \/ MANUAL \/ K AUTO\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 10pt;\"\u003eBacklight Compensation\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 10pt;\"\u003eDigital Control Protocol: VISCA \u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 10pt;\"\u003eRC servo channel control: Zoom control with autofocus\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 10pt;\"\u003eSuper Infrared (720-950nm) sensitivity for IR Filters\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 10pt;\"\u003eSupply Voltage is 12volt, also works with 3S LiPO (11.1V)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 10pt;\"\u003e190mA power consumption\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 10pt;\"\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 10pt;\"\u003e\u003cspan style=\"color: #ff2a00;\"\u003e\u003cstrong\u003eImportant Notice\u003c\/strong\u003e: FM36X is not a standard FPV camera, We are producing them for UAV designers by request. If you need 5 or more units or Out of stock please \u003c\/span\u003e\u003ca href=\"https:\/\/store.flytron.com\/pages\/contact-us\"\u003econtact us\u003c\/a\u003e. \u003c\/span\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Flytron","offers":[{"title":"PAL","offer_id":32226309701763,"sku":"FM36X-800TVL-ZOOM-CAME-1","price":224.9,"currency_code":"GBP","in_stock":true},{"title":"NTSC","offer_id":32226309734531,"sku":"FM36X-800TVL-ZOOM-CAME-2","price":224.9,"currency_code":"GBP","in_stock":false},{"title":"Replacement Control Card Only","offer_id":39721738436797,"sku":"FM36X-800TVL-ZOOM-CAME-3","price":45.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0333\/9219\/7763\/products\/FM36X800_4.jpg?v=1582195148"},{"product_id":"strobon-v2-cree-edition-navigation-strobe-lights","title":"STROBON v2 Cree Edition - Navigation Strobe Lights","description":"\u003cp\u003e\u003cspan style=\"color: #d0121a;\"\u003e\u003cstrong\u003eThis product is compatible with the latest FAA and CAA anti-collision light regulations for drones. It is visible from at least 3 miles at night.\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eSTROBON Lights have been among the most powerful navigation lights in the model market for years. This Cree Edition version features increased brightness, a durable polycarbonate dome, and wired connection.\u003c\/p\u003e\n\u003ch3\u003e⚡ Flash Patterns\u003c\/h3\u003e\n\u003cp\u003eConfigurable for 5 different flash patterns:\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eStrobe:\u003c\/strong\u003e Classic Strobon v1 effect — 3 rapid flashes mimicking xenon wing-tip strobes.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlink:\u003c\/strong\u003e Simulates belly or tail lights with continuous ON\/OFF flashing.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeartbeat:\u003c\/strong\u003e A gradual ramp-up and down cycle, like a beacon pulse.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRotating Beacon:\u003c\/strong\u003e Simulates rotary light movement — ramp up, flash, ramp down.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStatic:\u003c\/strong\u003e Constant light, ideal for landing or wing-tip marker lights.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003e🛠️ Operating Modes\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eRC Controlled Mode:\u003c\/strong\u003e Connect to any channel of your RC receiver. You can switch the light ON\/OFF via the selected channel. Multiple Strobons can be connected to the same channel and will operate synchronously.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandalone Mode:\u003c\/strong\u003e Power directly from a 3.5–6V battery for continuous operation without RC input.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e🎨 Colour Selection\u003c\/h3\u003e\n\u003cp\u003eDifferent LED colours vary in visibility, efficiency, and application:\u003c\/p\u003e\n\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003e\u003cspan style=\"color: #484444;\"\u003eWHITE:\u003c\/span\u003e\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eHighest visibility and efficiency.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003e\u003cspan style=\"color: #ff8000;\"\u003eYELLOW:\u003c\/span\u003e\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eSimilar to white but with better performance in misty conditions.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003e\u003cspan style=\"color: #ff2a00;\"\u003eRED:\u003c\/span\u003e\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eSecond-best visibility. Excellent for warning signals; equal efficiency to white.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003e\u003cspan style=\"color: #2dab23;\"\u003eGREEN:\u003c\/span\u003e\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eThird in visibility. Standard for port\/starboard (left\/right) navigation use.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003e\u003cspan style=\"color: #2b00ff;\"\u003eBLUE:\u003c\/span\u003e\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eLowest visibility and efficiency. Best for specialist applications, not recommended for navigation or warnings.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eIR 850nm\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eVisible through night vision goggles and IR-enabled cameras.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eIR 940nm\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eOnly visible via night vision equipment. Invisible to the naked eye.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cstrong\u003eBottom line:\u003c\/strong\u003e White and Red are best for high-visibility strobes. Green helps identify aircraft orientation. Blue should only be used for specific purposes.\u003c\/p\u003e\n\u003ch3\u003e📐 Specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSupply Voltage: 3.5–6V\u003c\/li\u003e\n\u003cli\u003eCurrent Consumption @5V:\n\u003cul\u003e\n\u003cli\u003eStrobe: 100mA (up to 1.5A peak)\u003c\/li\u003e\n\u003cli\u003eBlink: 110mA (250mA ON)\u003c\/li\u003e\n\u003cli\u003eHeartbeat: 180mA\u003c\/li\u003e\n\u003cli\u003eRotating Beacon: 230mA (up to 1.5A peak)\u003c\/li\u003e\n\u003cli\u003eStatic: 200mA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eDiameter: 21.5mm\u003c\/li\u003e\n\u003cli\u003eHeight: 13mm\u003c\/li\u003e\n\u003cli\u003eLens: Polycarbonate dome\u003c\/li\u003e\n\u003cli\u003eWeight: 4.5g (without wires)\u003c\/li\u003e\n\u003cli\u003eWire Length: 20cm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0333\/9219\/7763\/products\/IMG_20201105_093815_480x480.png?v=1604580148\" alt=\"Strobon Cree Dome\"\u003e\u003c\/p\u003e\n\u003ch3\u003e🔁 Pattern Selection\u003c\/h3\u003e\n\u003cp\u003eUse a wire or tweezers to change the light pattern:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eTouch the two small pads on the Strobon v2 board while it is powered ON.\u003c\/li\u003e\n\u003cli\u003eThe light will stop momentarily and switch to the next pattern upon release.\u003c\/li\u003e\n\u003cli\u003eNo changes occur when it's OFF.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003ciframe height=\"282\" width=\"501\" src=\"https:\/\/www.youtube.com\/embed\/85ATkWa9MOs\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: left;\"\u003e\u003cimg style=\"float: none;\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0333\/9219\/7763\/files\/strobon_v2_settings_240x240.png?v=1581600408\" alt=\"Strobon v2 Settings\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0333\/9219\/7763\/files\/airplane_navigation_light_locations_480x480.png?v=1581600498\" alt=\"Navigation Light Locations\"\u003e\u003c\/p\u003e\n\u003ch3\u003e📊 Schematic: RC Controlled \u0026amp; Synchronized Mode\u003c\/h3\u003e\n\u003cp\u003e\u003cimg style=\"float: none;\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0333\/9219\/7763\/files\/Strobon_Standard_s_480x480.png?v=1581600540\" alt=\"RC Receiver Wiring\"\u003e\u003c\/p\u003e\n\u003ch3\u003e⚙️ RC Channel Settings\u003c\/h3\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0333\/9219\/7763\/files\/shutter_positions_3_240x240.png?v=1581600598\" alt=\"Shutter Positions\"\u003e\u003c\/p\u003e\n\u003ch3\u003e🔋 Schematic: Standalone Mode\u003c\/h3\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0333\/9219\/7763\/files\/Strobon_Standard_480x480.png?v=1581600627\" alt=\"Standalone Mode Schematic\"\u003e\u003c\/p\u003e\n\u003ch3\u003e▶️ Customer Videos\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eSteven\u003c\/strong\u003e on Tarot X6:\u003c\/p\u003e\n\u003cp\u003e\u003ciframe height=\"281\" width=\"500\" src=\"https:\/\/www.youtube.com\/embed\/yFfPAs6PpYc?rel=0\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFernando\u003c\/strong\u003e (wiring details in video description):\u003c\/p\u003e\n\u003cp\u003e\u003ciframe height=\"281\" width=\"500\" src=\"https:\/\/www.youtube.com\/embed\/6XMfcZfgWTI?rel=0\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eStan\u003c\/strong\u003e demonstration:\u003c\/p\u003e\n\u003cp\u003e\u003ciframe height=\"279\" width=\"496\" src=\"https:\/\/www.youtube.com\/embed\/_YqbogW3NLs?rel=0\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e","brand":"Flytron","offers":[{"title":"White","offer_id":37431344562365,"sku":"STRO-V2-CREE-EDIT-NAVI-1","price":9.99,"currency_code":"GBP","in_stock":true},{"title":"Red","offer_id":37431344627901,"sku":"STRO-V2-CREE-EDIT-NAVI-2","price":9.99,"currency_code":"GBP","in_stock":true},{"title":"Green","offer_id":37431344693437,"sku":"STRO-V2-CREE-EDIT-NAVI-3","price":9.99,"currency_code":"GBP","in_stock":true},{"title":"Blue","offer_id":37431344758973,"sku":"STRO-V2-CREE-EDIT-NAVI-4","price":9.99,"currency_code":"GBP","in_stock":true},{"title":"Amber\/Yellow","offer_id":37431344824509,"sku":"STRO-V2-CREE-EDIT-NAVI-5","price":9.99,"currency_code":"GBP","in_stock":true},{"title":"IR 850nm","offer_id":37431344890045,"sku":"STRO-V2-CREE-EDIT-NAVI-6","price":11.99,"currency_code":"GBP","in_stock":true},{"title":"IR 940nm","offer_id":37431344955581,"sku":"STRO-V2-CREE-EDIT-NAVI-7","price":11.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0333\/9219\/7763\/products\/IMG_20201105_094123.jpg?v=1604580504"},{"product_id":"tiny-drive-v1-sbus-ppm-1-5a-dual-motor-controller","title":"TinyDrive v1 - SBUS\/PPM 1.5A Dual Motor ESC \/ Controller","description":"\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eTinyDrive is the first all in one dual-motor controller for small robotic platforms.\u003cbr\u003eThe board is supporting SBUS and PPM RC receivers, 1.5A motor outputs, Headlight Output, Protected battery input and motor outputs. \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch1\u003e\n\u003cspan style=\"text-decoration: underline;\" data-mce-style=\"text-decoration: underline;\"\u003eConnections\u003c\/span\u003e\u003cbr\u003e\n\u003c\/h1\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0333\/9219\/7763\/files\/tinydrive_schematic_480x480.png?v=1610797860\" alt=\"TinyDrive Schematic\" data-mce-src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0333\/9219\/7763\/files\/tinydrive_schematic_480x480.png?v=1610797860\"\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBattery Connection:\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eTinyDrive battery input is reverse protected and compatible with 3.3-11 volts batteries. The default firmware is expecting 1S or 2S Lithium batteries and the controller will stop working and double blink continuously under 3.2v per cell (6.4v for 2S LiPo) to avoid battery failures.  You can also use 3xAA or 4xAA battery packs until 3.2volts. \u003cbr\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMotor Connection:\u003c\/strong\u003e\u003cbr\u003eYou can connect any brushed motors to the motor pads including the hacked RC servos, N20 and yellow plastic geared robotic motors. The motor pads are marked as A \u0026amp; B instead of + \u0026amp; - use to the bidirectional usage.  The maximum output is 1.5A per motor and onboard DRV8835 IC has internal current and reverses supply protection.\u003cbr\u003eThe motor outputs are connected to CH1 and CH2. These outputs are mixed in default and Tiny Drive will calculate the correct output for tank-like platforms. You can switch to non-mixed mode if you want to mix on your transmitter or want to use with a toy car. (motor 1 for the throttle, motor 2 for the steering) \u003cspan data-mce-fragment=\"1\"\u003e(see mixer mode selection section)\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003eRC Receiver Connection:\u003cbr\u003e\u003c\/strong\u003eTinyDrive is pin to pin compatible with FrSky XM+ SBUS receivers for a compact installation into small places.  You can also use any SBUS or PPM receiver. TinyDrive will detect the signal type automatically. The receiver supply pin is 3.3v regulated, you can supply your receiver over the battery(+) pin if your receiver is not supporting 3.3v and requesting higher voltage to operate. Please check your receiver's manual for the details.  \u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHeadlight\/Buzzer Connection:\u003cbr\u003e\u003c\/strong\u003eThe headlight output is a \u003cspan data-mce-fragment=\"1\"\u003eproportional(CH3) PWM output to drive small loads. It's connected to the battery voltage over 10 Ohm resistor by a transistor. The resistor will limit the output current for maximum 1\/10 of the supply voltage.  It's ideal to control headlights or locator buzzer\/horn etc. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSmall Pads\u003cbr\u003e\u003c\/strong\u003eThe pads are connected to D13, D12, D11, D10 pins of the Atmega328P microcontroller. They don't have any feature in the default firmware.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eI2C Pads (on the backside)\u003cbr\u003e\u003c\/strong\u003eThis is the expansion port for the customised firmware. \u003cbr\u003eThe default firmware is using SDA \u0026amp; SCL pads for the mixer mode selection\u003cspan data-mce-fragment=\"1\"\u003e(see mixer mode selection section) and PWM output. \u003cbr\u003eYou can connect two servos\/ESC\/RC device to SDA and SCL pins to control over CH4 and CH5. \u003cbr\u003e\u003cspan style=\"color: #ff2a00;\"\u003eWarning: Don't connect any servo or similar high current device to the onboard 3.3v power supply. You must supply them separately. \u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cspan style=\"color: #ff2a00;\"\u003eWarning 2: Some servos may activate the mixer mode selection on startup. Prefer SDA instead of SLC pin if only one servo required. \u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e   \u003c\/p\u003e\n\u003ch2\u003e\u003cspan style=\"text-decoration: underline;\" data-mce-style=\"text-decoration: underline;\"\u003eMixer Modes\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp\u003eThere are 2 different mixer modes on TinyDrive.\u003cbr\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003eThe mixed-mode(Default)\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003eThe mixed-mode will use simple math to drive motors by CH1 and CH2  stick commands. You can use standard RC transmitter settings and the controller will calculate the PWM values for a dual motor tank like platforms. \u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"TinyDrive Mixed Dual Motor\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0333\/9219\/7763\/files\/IMG_20210115_193053_480x480.png?v=1610834218\" data-mce-src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0333\/9219\/7763\/files\/IMG_20210115_193053_480x480.png?v=1610834218\"\u003e\u003c\/p\u003e\n\u003cp\u003eThe mixer math:\u003cbr\u003emotor1_output = m_throttle + m_direction; \u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003emotor1_\u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003eoutput\u003c\/span\u003e = m_throttle - m_direction; \u003cbr\u003e\u003c\/p\u003e\n\u003ch3\u003e\n\u003cbr\u003e\u003cstrong\u003eThe direct-mode\u003c\/strong\u003e\n\u003c\/h3\u003e\n\u003cp\u003eThe direct-mode will calculate motor PWM values without mixing.  You can mix CH1 and CH2 on your transmitter for dual motor platforms or use it directly to hack toy cars\u003cspan data-mce-fragment=\"1\"\u003e(motor 1 for the throttle, motor 2 for the steering)\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cimg alt=\"TinyDrive Toy Car Setup\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0333\/9219\/7763\/files\/IMG_20210116_193102_480x480.png?v=1610834278\" data-mce-src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0333\/9219\/7763\/files\/IMG_20210116_193102_480x480.png?v=1610834278\"\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch3\u003eMixer Mode Selection\u003cbr\u003e\n\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eConnect the battery when holding SDA and SCL connected by a tweezer\/cable.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eThe mixer mode will toggle between two modes above and recorder to the internal EEPROM\u003c\/li\u003e\n\u003cli\u003eThe green onboard led will start blinking continuously to tell you the process has done. \u003c\/li\u003e\n\u003cli\u003eYou can remove the tweezer now. \u003c\/li\u003e\n\u003cli\u003eUnplug the battery and plug again to continue.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003e\u003cspan style=\"text-decoration: underline;\" data-mce-style=\"text-decoration: underline;\"\u003eArduino Programming\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp\u003eThe board is based on Atmega328P microcontroller and running Arduino Pro Mini 5v\/16mhz Bootloader for custom firmware development.\u003c\/p\u003e\n\u003cp\u003eThe reset pad is not accessible by the pin headers, so you must shortcut to the ground and release by hand(tweezer or cable)  when you see \"Uploading\" message on Arduino IDE. Alternatively, follow the process below.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eArduino Firmware Upload Process:\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSelect \"\u003cspan data-mce-fragment=\"1\"\u003eArduino Pro Mini 5v\/16mhz\" from Tools\u0026gt;Board\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan data-mce-fragment=\"1\"\u003eConnect \u003c\/span\u003eTx, Rx and GND pin the FTDI adapter\u003c\/li\u003e\n\u003cli\u003eUnplug the battery\u003c\/li\u003e\n\u003cli\u003ePress the Upload button and wait for compiling\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003ePlug the battery immediately when you see \"Uploading...\" message\u003c\/li\u003e\n\u003cli\u003eFTDI LEDs will start blinking and you will see \"Done Uploading\" message in a few seconds.  \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003eRX pin connected to the microcontroller over an XOR gate and the second pin of the gate connected to A3 pin of the microcontroller. The RX input will be inverted for SBUS protocol when A3 is High. \u003cbr\u003e\u003cbr\u003eTX and D2 pins are connected. Serial TX must be disabled by the command below to use the port as D2 IO or External Interrupt(0). \u003c\/p\u003e\n\u003cp\u003eUCSR0B \u0026amp;= ~(1\u0026lt;\u0026lt;TXEN0);  \u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0333\/9219\/7763\/files\/tiny_drive_arduino_pinouts_480x480.png?v=1610796702\" alt=\"Tiny Drive Arduino Pinouts\"\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eAutomatic SBUS \/ PPM receiver detection.\u003c\/li\u003e\n\u003cli\u003eSupporting Ch1,Ch2 (motors) and Ch3(LED\/Buzzer output.\u003c\/li\u003e\n\u003cli\u003eSelectable Mixed \/ Direct motor outputs. (see mixer mode selection section)\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003eDimmable LED Headlight \/ Buzzer output: max. 300mA @ 3.7v \u003c\/span\u003e\u003cspan\u003e(10 Ohm resistor limited.) \u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003eDual-H-bridge motor driver: can drive two DC motors.\u003c\/li\u003e\n\u003cli\u003eBattery supply voltage: 3.3 V to 11 V\u003c\/li\u003e\n\u003cli\u003eOutput current: 1.2 A continuous (1.5 A peak) per motor\u003c\/li\u003e\n\u003cli\u003eMotor Shortcut, Battery Reverse and LiPo cell drain protections.\u003c\/li\u003e\n\u003cli\u003eATMEGA328P microcontroller. Arduino Pro Mini Bootloader installed.\u003c\/li\u003e\n\u003cli\u003eDRV8835 motor driver. \u003c\/li\u003e\n\u003cli\u003eI2C \/ Analog Input pads for sensor extension (you need a supporting firmware)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eSPI\/ 4x IO pads for extension\u003c\/li\u003e\n\u003cli\u003eOnboard 1\/11 voltage divider to measure the battery voltage.\u003c\/li\u003e\n\u003cli\u003e200mA 3.3V LDO voltage regulator.\u003c\/li\u003e\n\u003cli\u003eDimensions: \u003cspan data-mce-fragment=\"1\"\u003e24 x 17 x 2.5mm\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003eWeight: 2 grams\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Flytron","offers":[{"title":"Default Title","offer_id":37915492155581,"sku":"TinyDv1","price":19.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0333\/9219\/7763\/products\/IMG_20210116_202321.png?v=1610833976"},{"product_id":"strobon-c-1-standalone-drone-strobe-with-usb-type-c-charging","title":"STROBON C-1 Cree® Standalone Drone Strobe with USB Type-C Charging","description":"\u003cp\u003e\u003cspan style=\"color: #d0121a;\"\u003e\u003cstrong\u003eThis product is compatible with the latest FAA and CAA anti-collision light regulations for drones. It is visible from at least 3 miles at night.\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eThe Strobon™ C-1 is our first USB-C rechargeable navigation strobe, designed for enclosed drones including:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDJI (Mini 2, Mini, Spark, Mavic Air, Mavic Mini, Phantom, Inspire)\u003c\/li\u003e\n\u003cli\u003eParrot\u003c\/li\u003e\n\u003cli\u003esenseFly\u003c\/li\u003e\n\u003cli\u003eXiaomi\u003c\/li\u003e\n\u003cli\u003eWalkera and others\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eSpecifically designed with DJI Mini and Mini 2 in mind, the Strobon™ C-1 uses a USB-C charging port and includes 15mm 3M Dual Lock fasteners that fit neatly under the rear motor mounts.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cem\u003eWeighing less than 4 grams, two units can be mounted on DJI Mini series drones without compromising flight balance or exceeding the 250g regulatory weight limit.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0333\/9219\/7763\/files\/IMG_20210524_103620_480x480.jpg?v=1621853017\" alt=\"Strobon C-1 on DJI Mini 2\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0333\/9219\/7763\/files\/IMG_20210420_174029_480x480.jpg?v=1621853662\" alt=\"Strobon C-1 installed under motor mount\"\u003e \u003cem\u003eFits between DJI Mini 2 body and rear motor mount when folded.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch3\u003e🔌 No Cable, No Fuss\u003c\/h3\u003e\n\u003cp\u003eAttach the light using the included \u003ca href=\"https:\/\/flytron.com\/collections\/led-light-systems\/products\/3m-dual-lock-15mm-round-fastener-for-dji-mini-1-2-motor-mount\" style=\"color: #2c9ffd;\" target=\"_blank\"\u003e\u003cstrong\u003e3M Dual Lock fasteners\u003c\/strong\u003e\u003c\/a\u003e, or your preferred adhesive. Press the button to turn on. That’s it.\u003c\/p\u003e\n\u003cp\u003eThese fasteners offer a secure, vibration-resistant, and dust-proof mounting solution.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0333\/9219\/7763\/files\/IMG_20210524_103658_3m_480x480.png?v=1621852945\" alt=\"Installed Under Rear Motor Mount\"\u003e \u003cem\u003eEnhances visibility from the ground during both day and night.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0333\/9219\/7763\/files\/IMG_20210524_104017_480x480.jpg?v=1621853973\" alt=\"Top Mounted for Airborne Visibility\"\u003e \u003cem\u003eTop-mounted configuration provides visibility to nearby aircraft.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch3\u003e⚙️ Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eHigh-intensity Cree® LED\u003c\/li\u003e\n\u003cli\u003eOver 2 hours of continuous operation\u003c\/li\u003e\n\u003cli\u003eLightweight—compatible with DJI Mini (1\/2) drones under 250g\u003c\/li\u003e\n\u003cli\u003eNo external wiring required\u003c\/li\u003e\n\u003cli\u003eOne-button interface for all functions\u003c\/li\u003e\n\u003cli\u003eBattery level and charging indicators\u003c\/li\u003e\n\u003cli\u003eUSB Type-C charging (cable not included)\u003c\/li\u003e\n\u003cli\u003eBattery includes overcharge and discharge protection\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e🎨 Colour Selection\u003c\/h3\u003e\n\u003cp\u003eDue to visual sensitivity and LED efficiency, each colour has different characteristics:\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"background-color: #000000; color: #d4d4d4;\"\u003e\u003cstrong\u003eWHITE:\u003c\/strong\u003e\u003c\/span\u003e Best visibility and efficiency\u003cbr\u003e\u003cspan style=\"background-color: #d0121a; color: #ffffff;\"\u003e\u003cstrong\u003eRED:\u003c\/strong\u003e\u003c\/span\u003e Excellent for warning signals; second-best visibility\u003cbr\u003e\u003cspan style=\"background-color: #218e53; color: #ffffff;\"\u003e\u003cstrong\u003eGREEN:\u003c\/strong\u003e\u003c\/span\u003e Ideal for RED\/GREEN directional navigation\u003cbr\u003e\u003cspan style=\"background-color: #2445a2; color: #ffffff;\"\u003e\u003cstrong\u003eBLUE:\u003c\/strong\u003e\u003c\/span\u003e Lowest visibility; use for special applications only\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBottom line:\u003c\/strong\u003e White and Red offer the best long-range visibility. Green is useful for orientation. Blue is for niche use cases.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0333\/9219\/7763\/files\/strobon_c-1_240x240.png?v=1621855284\" alt=\"Strobon C-1 Schematic\"\u003e\u003c\/p\u003e\n\u003ch3\u003e🧭 Usage\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBattery Status:\u003c\/strong\u003e Press and release the button when OFF\u003cbr\u003e- 1 blink: Needs charge\u003cbr\u003e- 2 blinks: OK\u003cbr\u003e- 3 blinks: Fully charged\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eON\/OFF:\u003c\/strong\u003e Press and hold the button for 3 seconds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCharging:\u003c\/strong\u003e Use any USB-C charger or USB port (cable not included)\u003cbr\u003e- Rapid blinking = charging\u003cbr\u003e- 1s ON \/ 2s OFF = fully charged\u003cbr\u003e- Charging time ~2 hours\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e⚠️ Notice\u003c\/h3\u003e\n\u003cp\u003e\u003cspan style=\"color: #d0121a;\"\u003eThe built-in PCM module protects the battery from overcharging and overdischarge. If the light does not respond, it may be in low-voltage protection mode. Recharge to resume operation.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e📐 Specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDimensions: 20mm × 16mm × 8mm\u003c\/li\u003e\n\u003cli\u003eWeight: ~4g\u003c\/li\u003e\n\u003cli\u003eCurrent Consumption: \u0026lt;30mA per hour\u003c\/li\u003e\n\u003cli\u003eCharge Port: USB Type-C\u003c\/li\u003e\n\u003cli\u003eCharge Current: Max 40mA\u003c\/li\u003e\n\u003cli\u003eCharge Time: Approx. 2 hours\u003c\/li\u003e\n\u003cli\u003eBattery: 100mAh LiPo with PCM protection\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Flytron","offers":[{"title":"White","offer_id":39840591085757,"sku":"STRO-C-1-CREE-STAN-DRON-1","price":15.9,"currency_code":"GBP","in_stock":true},{"title":"Red","offer_id":39840591118525,"sku":"STRO-C-1-CREE-STAN-DRON-2","price":15.9,"currency_code":"GBP","in_stock":true},{"title":"Green","offer_id":39840591151293,"sku":"STRO-C-1-CREE-STAN-DRON-3","price":15.9,"currency_code":"GBP","in_stock":true},{"title":"Blue","offer_id":39840591184061,"sku":"STRO-C-1-CREE-STAN-DRON-4","price":15.9,"currency_code":"GBP","in_stock":true},{"title":"940nm IR","offer_id":44266700177597,"sku":"STRO-C-1-CREE-STAN-DRON-5","price":16.9,"currency_code":"GBP","in_stock":true},{"title":"850nm IR","offer_id":44266719346877,"sku":"STRO-C-1-CREE-STAN-DRON-6","price":16.9,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0333\/9219\/7763\/products\/IMG_20210524_103807.jpg?v=1651043637"},{"product_id":"strobon-c-2-dual-cree®-standalone-drone-strobe-with-usb-type-c-charging","title":"STROBON C-2 Dual Cree® Standalone Drone Strobe with USB Type-C Charging","description":"\n\u003cp\u003e\u003cspan style=\"color: #d0121a;\"\u003e\u003cstrong\u003eThis product is compatible with the latest FAA and CAA anti-collision light regulations for drones. It is visible from at least 3 miles at night.\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eThe Strobon™ C-2 is our first dual-Cree® navigation strobe with USB-C charging, specially designed for enclosed drones such as:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDJI (Mini 2, Mini, Spark, Mavic Air, Mavic Mini, Phantom, Inspire)\u003c\/li\u003e\n\u003cli\u003eParrot\u003c\/li\u003e\n\u003cli\u003esenseFly\u003c\/li\u003e\n\u003cli\u003eXiaomi\u003c\/li\u003e\n\u003cli\u003eWalkera and others\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThis model was developed specifically for DJI Mini and Mini 2 drones, which support USB-C charging and have mounting space under the rear motor mounts. It includes 15mm 3M Dual Lock fasteners for secure, vibration-resistant installation.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cem\u003eWeighing less than 4 grams, the C-2 can be used in pairs on DJI Mini series drones without affecting balance or exceeding the 250g legal limit.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"Strobon C-2 Navigation Light\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0333\/9219\/7763\/products\/IMG_20220427_082326_edit_218172486239625_480x480.jpg?v=1651045866\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"Mounting Under Rear Motor Mount\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0333\/9219\/7763\/products\/IMG_20220427_082050_edit_218216773872431_480x480.jpg?v=1651045864\"\u003e \u003cem\u003eFits between DJI Mini 2 body and rear motor mount when folded.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch3\u003e🔌 No Cable, No Fuss\u003c\/h3\u003e\n\u003cp\u003eAttach the light using the included \u003ca style=\"color: #2c9ffd;\" href=\"https:\/\/flytron.com\/collections\/led-light-systems\/products\/3m-dual-lock-15mm-round-fastener-for-dji-mini-1-2-motor-mount\" target=\"_blank\"\u003e\u003cstrong\u003e3M Dual Lock fasteners\u003c\/strong\u003e\u003c\/a\u003e or your preferred adhesive. Press the button to activate—no setup required.\u003c\/p\u003e\n\u003cp\u003eThese fasteners offer vibration- and dust-resistant mounting.\u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"Installed Under Rear Motor Mount\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0333\/9219\/7763\/files\/IMG_20210524_103658_3m_480x480.png?v=1621852945\"\u003e \u003cem\u003eImproves visibility from ground in day or night conditions.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"Top Mounted Warning Light\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0333\/9219\/7763\/products\/IMG_20220427_082234_edit_218197537440142_480x480.jpg?v=1651045943\"\u003e \u003cem\u003eTop-mounted version for aerial visibility to nearby aircraft.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/uqbUc84bt7E\" title=\"YouTube video player\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003ch3\u003e⚙️ Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDual high-intensity Cree® LEDs (strobes in alternating colours)\u003c\/li\u003e\n\u003cli\u003e1.5+ hours continuous operation\u003c\/li\u003e\n\u003cli\u003eCompatible with DJI Mini (1\/2) under 250g with two units\u003c\/li\u003e\n\u003cli\u003eNo external wiring required\u003c\/li\u003e\n\u003cli\u003eSimple one-button interface\u003c\/li\u003e\n\u003cli\u003eBattery status and charging indicator\u003c\/li\u003e\n\u003cli\u003eUSB Type-C charging (cable not included)\u003c\/li\u003e\n\u003cli\u003eBuilt-in overcharge and discharge protection\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e🎨 Colour Selection\u003c\/h3\u003e\n\u003cp\u003eEach colour offers different visibility and energy efficiency due to the human eye's sensitivity and LED design:\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"background-color: #000000; color: #d4d4d4;\"\u003e\u003cstrong\u003eWHITE:\u003c\/strong\u003e\u003c\/span\u003e Best visibility and efficiency\u003cbr\u003e\u003cspan style=\"background-color: #d0121a; color: #ffffff;\"\u003e\u003cstrong\u003eRED:\u003c\/strong\u003e\u003c\/span\u003e Second-best for visibility, ideal for warning\u003cbr\u003e\u003cspan style=\"background-color: #218e53; color: #ffffff;\"\u003e\u003cstrong\u003eGREEN:\u003c\/strong\u003e\u003c\/span\u003e Good visibility and commonly used for left\/right navigation\u003cbr\u003e\u003cspan style=\"background-color: #2445a2; color: #ffffff;\"\u003e\u003cstrong\u003eBLUE:\u003c\/strong\u003e\u003c\/span\u003e Least visibility; suitable only for special applications\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBottom line:\u003c\/strong\u003e White and Red are ideal for maximum visibility. Green helps with directional awareness. Use Blue only in specialised scenarios.\u003c\/p\u003e\n\u003cp\u003e\u003cimg height=\"220\" width=\"245\" alt=\"Strobon C-2 LED Light Profile\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0333\/9219\/7763\/files\/strobon_c-2_480x480.png?v=1651043060\"\u003e\u003c\/p\u003e\n\u003ch3\u003e🧭 Usage\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBattery Status:\u003c\/strong\u003e Press and release button while OFF\u003cbr\u003e- 1 blink: Needs charging\u003cbr\u003e- 2 blinks: OK\u003cbr\u003e- 3 blinks: Fully charged\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eON\/OFF:\u003c\/strong\u003e Press and hold for 3 seconds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCharging:\u003c\/strong\u003e Connect using a USB-C cable\u003cbr\u003e- Blinks rapidly while charging\u003cbr\u003e- Blinks 1s ON \/ 2s OFF when fully charged\u003cbr\u003e- Charging time ~2 hours\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e⚠️ Notice\u003c\/h3\u003e\n\u003cp\u003e\u003cspan style=\"color: #d0121a;\"\u003eThe battery includes a built-in PCM module for protection. If the unit is unresponsive, it may be in low-voltage lockout mode. Recharging will restore function.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e📐 Specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDimensions: 20mm × 16mm × 8mm\u003c\/li\u003e\n\u003cli\u003eWeight: ~4g\u003c\/li\u003e\n\u003cli\u003ePower Consumption: \u0026lt;30mA per hour\u003c\/li\u003e\n\u003cli\u003eCharging Port: USB Type-C\u003c\/li\u003e\n\u003cli\u003eCharging Current: Max 40mA\u003c\/li\u003e\n\u003cli\u003eCharging Time: Approx. 2 hours\u003c\/li\u003e\n\u003cli\u003eBattery: 100mAh LiPo with PCM protection\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Flytron","offers":[{"title":"WHITE \/ RED","offer_id":41774523023549,"sku":"STRO-C-2-DUAL-CREE-STAN-1","price":16.9,"currency_code":"GBP","in_stock":true},{"title":"WHITE \/ GREEN","offer_id":41774523056317,"sku":"STRO-C-2-DUAL-CREE-STAN-2","price":16.9,"currency_code":"GBP","in_stock":true},{"title":"GREEN \/ RED","offer_id":41774523089085,"sku":"STRO-C-2-DUAL-CREE-STAN-3","price":16.9,"currency_code":"GBP","in_stock":true},{"title":"RED \/ BLUE (Police)","offer_id":41774523121853,"sku":"STRO-C-2-DUAL-CREE-STAN-4","price":16.9,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0333\/9219\/7763\/products\/IMG_20220427_082050_edit_218216773872431.jpg?v=1651045864"},{"product_id":"strobon-xl-cree-edition-navigation-strobe-lights","title":"STROBON XL Cree Edition - Dual Colours Navigation Strobe Lights","description":"\u003cp\u003e\u003cspan style=\"color: #d0121a;\"\u003e\u003cstrong\u003eThis product is compatible with the latest FAA and CAA anti-collision light regulations for drones. It is visible from at least 3 miles at night.\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eSTROBON lights have been among the most powerful navigation lights on the model aircraft market for years. These XL Cree Edition lights offer increased brightness and feature a durable polycarbonate dome with wired connection.\u003c\/p\u003e\n\u003cp\u003eTwo working modes are supported:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eRC Controlled Mode:\u003c\/strong\u003e\u003cbr\u003eConnect the light to a spare channel on your RC receiver to enable\/disable it remotely. Each Strobon unit interprets servo signals, so multiple units can be connected to the same RC channel and remain synchronised.\u003cbr\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandalone Mode:\u003c\/strong\u003e\u003cbr\u003eConnect directly to a 3.5–6V battery for continuous operation without RC input.\u003cbr\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cstrong\u003eColour Selection\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003eEach colour differs in visibility and energy efficiency due to human eye sensitivity and LED technology. Based on long-term field experience:\u003c\/p\u003e\n\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003e\u003cspan style=\"color: #484444;\"\u003eWHITE\u003c\/span\u003e\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eHighest visibility and energy efficiency.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003e\u003cspan style=\"color: #ff8000;\"\u003eYELLOW\u003c\/span\u003e\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eSimilar to white, with improved performance in misty conditions.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003e\u003cspan style=\"color: #ff2a00;\"\u003eRED\u003c\/span\u003e\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eSecond in visibility. Matches white in efficiency. Best for warning applications.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003e\u003cspan style=\"color: #2dab23;\"\u003eGREEN\u003c\/span\u003e\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eThird in visibility and efficiency. Ideal for standard navigation use (right side).\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003e\u003cspan style=\"color: #2b00ff;\"\u003eBLUE\u003c\/span\u003e\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eLower visibility and efficiency. Not recommended for navigation or warnings—suitable for special applications.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eIR 850nm\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eVisible to night vision goggles and some surveillance cameras.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eIR 940nm\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eVisible to night vision goggles only. Completely invisible to the naked eye. May be seen by some cameras at close range.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cstrong\u003eSummary:\u003c\/strong\u003e White and Red are optimal for long-range visibility. Green is ideal for directional orientation. Blue should be reserved for specific, non-standard uses.\u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSupply Voltage: 3.5–6V\u003c\/li\u003e\n\u003cli\u003eCurrent Consumption: ~200mA @ 5V\u003c\/li\u003e\n\u003cli\u003eDiameter: 21.5mm\u003c\/li\u003e\n\u003cli\u003eHeight: 13mm\u003c\/li\u003e\n\u003cli\u003eLens: Polycarbonate dome\u003c\/li\u003e\n\u003cli\u003eWeight: 4.5g (without wires)\u003c\/li\u003e\n\u003cli\u003eWire Length: 20cm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSynchronised \u0026amp; RC Controlled Mode Wiring\u003c\/h3\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\u003cimg alt=\"RC Receiver Wiring\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0333\/9219\/7763\/files\/Strobon_Standard_s_480x480.png?v=1581600540\"\u003e\u003c\/div\u003e\n\u003ch3\u003eRC Channel Settings\u003c\/h3\u003e\n\u003cp\u003e\u003cimg alt=\"RC Channel Settings\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0333\/9219\/7763\/files\/shutter_positions_3_240x240.png?v=1581600598\"\u003e\u003c\/p\u003e\n\u003ch3\u003eStandalone Mode Wiring\u003c\/h3\u003e\n\u003cp\u003e\u003cimg alt=\"Strobon Standalone Usage\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0333\/9219\/7763\/files\/Strobon_Standard_480x480.png?v=1581600627\"\u003e\u003c\/p\u003e","brand":"Flytron","offers":[{"title":"Red(static)-White(strobe)","offer_id":41783984488637,"sku":"STRO-XL-CREE-EDIT-DUAL-1","price":12.99,"currency_code":"GBP","in_stock":true},{"title":"Green(static)-White(strobe)","offer_id":41783984521405,"sku":"STRO-XL-CREE-EDIT-DUAL-2","price":12.99,"currency_code":"GBP","in_stock":true},{"title":"Red-Green(both strobes)","offer_id":41783984554173,"sku":"STRO-XL-CREE-EDIT-DUAL-3","price":12.99,"currency_code":"GBP","in_stock":true},{"title":"Red-Blue(both strobe) Police","offer_id":41783984586941,"sku":"STRO-XL-CREE-EDIT-DUAL-4","price":12.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0333\/9219\/7763\/products\/PhotoRoom-20220429_135807_edit_24903642467553.png?v=1651238282"},{"product_id":"strobon-2-6s-3a-power-regulator-and-synchronizer","title":"STROBON  2-6S  3A Regulator and Synchronizer","description":"\u003cp\u003eThe Strobon PWR 3A is a compact navigation light synchroniser with an integrated 3A uBEC power supply.\u003c\/p\u003e\n\n\u003cp\u003eThis small board converts 2–6S LiPo battery input (7.4–22.5V) to a stable 5V output, while also generating a PWM signal to power and synchronise navigation lights.\u003c\/p\u003e\n\n\u003cdiv\u003e\n  \u003ciframe title=\"YouTube video player\" src=\"https:\/\/www.youtube.com\/embed\/6JKh6UKr510\" height=\"315\" width=\"560\" allowfullscreen=\"\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share\" frameborder=\"0\"\u003e\u003c\/iframe\u003e\n\u003c\/div\u003e\n\n\u003cp\u003eYou can optionally control the lights remotely using the isolated RC-IN socket, allowing ON\/OFF switching via an available RC receiver channel.\u003c\/p\u003e\n\n\u003cdiv\u003e\n  \u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/_1irsPzdtaQ\" title=\"YouTube video player\" frameborder=\"0\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share\" allowfullscreen=\"\"\u003e\u003c\/iframe\u003e\n\u003c\/div\u003e\n\n\u003cp\u003e\n  \u003cimg alt=\"Strobon PWR 3A Board\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0333\/9219\/7763\/files\/STROBON_PWR_3A_480x480.png?v=1678894207\"\u003e\n  \u003c\/p\u003e\u003cp style=\"font-size: 14px; color: #666;\"\u003eStrobon PWR 3A board with integrated power and sync signal output.\u003c\/p\u003e\n\n\n\u003ch3\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eDimensions: 50mm × 16mm × 10mm\u003c\/li\u003e\n  \u003cli\u003eWeight: 7g\u003c\/li\u003e\n  \u003cli\u003eBase Power Consumption: 5mA @ 2S input\u003c\/li\u003e\n  \u003cli\u003eIntegrated Step-Down Converter: 3A, up to 26V max input\u003c\/li\u003e\n  \u003cli\u003eOptional RC Control Input: Standard 50Hz servo PWM signal\u003cbr\u003e\n    \u003cspan style=\"color: #ff2a00;\"\u003e* Only Signal and Ground are connected; (+) pin is not active.\u003c\/span\u003e\n  \u003c\/li\u003e\n\u003c\/ul\u003e\n","brand":"Flytron","offers":[{"title":"Right Angled - Inline","offer_id":42698122756285,"sku":"STRO-2-6S-3A-REGU-SYNC-1","price":19.9,"currency_code":"GBP","in_stock":true},{"title":"Straight Up","offer_id":42698122789053,"sku":"STRO-2-6S-3A-REGU-SYNC-2","price":19.9,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0333\/9219\/7763\/products\/PhotoRoom-20230315_154444_edit_448385425820122.png?v=1678957359"}],"url":"https:\/\/flytron.com\/collections\/frontpage.oembed","provider":"Flytron","version":"1.0","type":"link"}